User manual CAPRESSO F9

[. . . ] Impressa F9 Fully Automatic Coffee & Espresso Center with Claris Water Care System Operating Instructions and Warranty 63942R Customer Service 1-800-220-5701 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or appliance in water or other liquids. Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use and before cleaning. [. . . ] · Removes (if present) up to 85% chlorine, up to 90% lead, up to 95% copper and up to 67% aluminum. · Cleans the water through an upward current principle (Fig. 9) just before the brewing cycle starts, ensuring freshly filtered water every time you make coffee. When using the Claris water cartridge, you never need to decalcify your machine. · Is available through your retailer, the enclosed mail order form, or through www. capresso. com, or call 1-800-220-5701. 15. 16a. INSTALLING & ACTIVATING THE CLARIS WATER CARTRIDGE Important: Never install the cartridge before or during the first time preparation of the machine. · Make sure the water tank is empty. · Open water container lid and pull up the holder for the Claris cartridge (Fig. 10). · Insert the cartridge with its tapered end down. Make sure it fits snugly over the white mesh piece inside the water container. · Close the holder for the cartridge so that it engages in the water tank (Fig. 12). · Fill the water tank with fresh cold water and replace. You must activate the cartridge as follows: · Push and hold the P button. The display shows <FILTER NO> · Touch the ST@RT; the word NO starts blinking. · Touch either arrow, display shows: FILTER YES. The display shows: INSERT FILTER WATER PORTION · Place a large container underneath the frother (at least 30 oz. The machine pumps water through the frother, activating the filter. During this time the display reads FILTER RINSING. When the water flow stops the displays reads YOUR MACHINE IS HEATING The machine automatically returns to its coffee brewing setting: SELECT PRODUCT 16. Please note: As long as the filter is activated, the water hardness setting is automatically turned off. REPLACING THE CLARIS CARTRIDGE The filter is monitored automatically. 50 liters of water (55 quarts), the filter loses its effect. The display will show: REPLACE FILTER SELECT PRODUCT. [. . . ] Also, use a ground coffee which is ground somewhat coarser. 25. B. THE DISPLAY READS "FILL WATER" BUT THERE IS ENOUGH WATER IN THE WATER TANK. Reason: The low water floatation device (Fig. 8. 4) is missing. Solution: Within the water tank is a small compartment (like a mouse trap). [. . . ]