User manual CAPRESSO IMPRESSA S AVANTGARDE

[. . . ] Push and hold the RINSE button EMPTY TRAY/ EMPTY GROUNDS. Remove and empty the tray and the used coffee container and replace. Attention: You must remove the Traces of Coffee Grounds in New Machine?tray for 20 seconds even if it is empty. [. . . ] For hotter milk in either position move the dial more towards the (+) plus symbols. (The extra long hose lets you siphon milk from any carton without using the special milk container. ) Tip: Use chocolate milk to make great Hot Chocolate! O) Cleaning the frothXpress PLUS System Should be done right after use, takes less than 30 seconds. Store the milk container in the refrigerator and remove the frothXpress from the steam nozzle. Drop the hose and the frothXpress in a cup of hot water. This will push out any milk residue and prevents milk from hardening inside the system. Place a cup underneath the steam nozzle and push the STEAM button for three seconds. CAPRESSO CUSTOMER SERVICE: 1-800-220-5701 M-F 9AM - 9PM; Sat. 9AM - 5PM EST FAX: 201-767-9684 contact@capresso. com A LA CARTE button. Push the button and change the strength by turning the ROTARY DIAL (XMILD, MILD, NORMAL, STRONG, XSTRONG). During grinding turn the Dial to set the cup size. D) Changing the Grinder Fineness Important: You can only adjust the fineness during the actual grinding process. Open the bean container lid and turn the dial while grinding: larger dots: coarser; smaller dots: finer. For darker, oily beans, grind somewhat coarser. For lighter beans, grind somewhat finer. E) Using Hot Water (factory setting is 5 oz. ) Place a cup underneath the Hot Water Spout and turn the SELECTOR SWITCH to the right. To stop the hot water flow turn the SELECTOR SWITCH to the left. F) Frothing and Steaming with the DUAL FROTHER PLUS (Using the frothXpress PLUS system see section "N"). Important: All frother parts must be tightly connected and clean. Cappuccino: One shot espresso plus ~4 oz. Latte: One shot espresso plus ~4 to 5 oz. If the red lights in the steam buttons are ON, immerse the frother into a pitcher with milk and push the PERMANENT STEAM button. Steam pushes into the milk ( if the steam buttons are not illuminated, see chapters 16. 6 Operating Instructions). [. . . ] Replacing the Clearyl Cartridge When display shows SELECT PRODUCT /CHANGE FILTER and the RINSE button lights up: · Push the RINSE button. · Remove water tank, remove old filter. Rinse new filter under running water, attach to extension and install in water tank. Fill with fresh water and insert water tank into machine. [. . . ]