User manual CARDO SCALA RIDER G4

[. . . ] G4TM User Guide TABLE OF CONTENTS 1. 6 5. 1 MOUNTING THE HEADSET ON THE HELMET . 6 5. 2 ATTACHING THE CORDED MICROPHONE CLAMP ON A FULL-FACED HELMET. 7 5. 3 POSITIONING THE MICROPHONE AND SPEAKERS . [. . . ] Volume can be adjusted through the MP3 Player or the Volume Buttons of the headset. Any other audio connection will automatically mute the MP3 Player. The audio signal will return only when headset is once again in Standby mode. 12 scala rider® G4TM NOTE: While listening to your MP3 player, the VOX feature is disabled 8. USING THE MOBILE PHONE INITIATING AND RECEIVING MOBILE PHONE CALLS BASIC FUNCTIONS Answer a call Reject a call Tap the Mobile Button or speak loudly any word of your choice during an incoming call Remain silent for 15 seconds, OR press and hold the Mobile Button for 3 seconds during an incoming call Tap the Mobile Button during a call, or let the other party terminate the call During Standby, tap the Mobile Button and pronounce loudly the name of the person you wish to call. This feature is supported only by mobile phones that include the Voice Dial feature During Standby, tap the Mobile Button twice Terminate a call Voice Dial Redial ADVANCED FUNCTIONS FOR 3-WAY COMMUNICATION: Add/Remove CHANNEL "A" headset to/from phone call Add/Remove CHANNEL "B" headset to/from phone call Tap the CHANNEL "A" button while on a phone call Tap the CHANNEL "B" button while on a phone call When the headset is on an active phone call, any Intercom call request will be automatically rejected. Once the phone call is terminated, you can initiate and accept Intercom calls. STATUS LIGHTS LED Indication None 1 blue flash every 3 seconds 2 blue flashes every 3 seconds 1 red flash every 3 seconds 2 red flashes every 3 seconds Status Headset is off Standby ­ No call is in progress Call is in progress / FM Radio or MP3 Player ON Standby - Battery is low Low battery while a call is in progress / MP3 Player ON or FM Radio ON Charging Pairing is a one time process. Once completed, the headsets will remain paired and automatically recognize each other whenever they are within range. For details on Intercom use with other scala rider headsets, please refer to section 9. 11 below Your headset has two Intercom channels available for headsetto-headset connections. Therefore, your G4 can communicate simultaneously with up to two other headsets. If one of these other headsets is connected to yet another G4 headset, then all four participants can enter into a 4-way conference mode (see section 9. 10c below). 9. 2 BACKWARDS COMPATIBILITY Your scala rider G4 can also conduct Intercom communications with earlier scala rider models in different configurations and you can always change your preferences. There are four other scala rider models available that your G4 can connect to, and each of these connections comes with specific characteristics and / or limitations. In terms of range, Intercom communications between your G4 and another scala rider unit is limited to the distance of the lesser-range device. For example, connecting your G4 with a Q2 unit will enable intercom distances of up to 500 m / 540 yards, which is the maximum rated distance the Q2 can achieve. In the section below you can find out how to pair your G4 with other scala rider models, such as the "Q2TM", "SoloTM ", "FMTM ", or a Driver unit of the "TeamSetTM". In addition, your headsets are also fully compatible with the Schuberth SRC-SystemTM. For details, visit www. cardosystems. com/other-products/src. English Solid red 9. USING THE INTERCOM 9. 1 INTRODUCTION The scala rider G4 provides you with an impressive Bike-to-Bike Intercom range by simply flipping up the antenna. The Flip-up antenna allows you to maximize intercom range with other bikers at up to 1 mile / 1. 6 km (subject to terrain). The antenna is also Flip-up Antenna for extended range useful when riding in dense urban environments that may affect the transmission quality. You may keep the Flip-up Antenna open when not using the intercom, even though there is no particular need to do so. To set up one or two Intercom Bluetooth connections, you must first pair your G4 headset with the other headsets. [. . . ] Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the headset you agree to be bound to this agreement and forfeit the right to sue. Using a communication device while riding a motorcycle, scooter, moped, ATV, quad-bike or any other vehicle or equipment, whether on land, water or air (jointly referred to as "Vehicle") requires your complete and undivided attention. [. . . ]