User manual CARENA REMOTE-FLASH

[. . . ] Es importante leer este manual antes de usar por vez primera su euipo. l FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Inc. could void the user's authority to operate this product. [. . . ] · Press REVERSE and FORWARD keys to tune down or up the radio frequency. · PLAY, RECORD, STOP and PAUSE keys are only for easy control of external devices that are connected to your receiver such as CD, VCR, DVD, TAPE, etc. . The remote control currently operates most Thomson, CARENA and GE products, but it can be programmed to operate devices from other manufacturers (For details, refer to "Using the Remote to Control Additional Components" on page 14. DIGITAL Select the way your audio/video components are connected to the receiver (Analog, Optical or Coaxial). In TUNER mode, press to toggle between Stereo and Mono sound. LEVEL Press to adjust the volume of each speaker. Press repeatedly and the display will toggle among different channels (Left front speaker, Right front speaker, Center speaker, Left rear speaker, Right rear speaker, and Subwoofer). Press the VOLUME up and down arrow buttons for adjustment. . 7 9 12 11 10 NOTE The remote buttons GO BACK·DISC, GUIDE·RDM·PTY, INFO·RDS, INPUT·SEEK, ANT·FMS & AUDIO do not work in tuner mode. 12. SURR (Surround Sound Control) Press to change the surround sound settings. The display will toggle among DOLBY DIGITAL, DOLBY PROLOGIC, DTS , STEREO. LED indicator Lights up whenever a key on the remote control is pressed. 11 Operating Your Receiver Display C R S RS L C R LS LFE RS · Audio output is in dts mode. Press ON/STANDBY to switch on the receiver 3. Switch ON the DVD player and start playback 5. Select the appropriate A/V channel on the TV (refer to your TV manual for details) until the image from the DVD player is displayed 7. Set the sound Mode if needed (see "Advanced sound control" for details) Example 1: To play 5. 1 Dolby Digital surround sound Press SURR. MODE button until "Dolby Digital" appears on the Display and all of the speaker'' icons light up. Example 2: DVD: You may also need to select the Dolby Digital 5. 1 on the DVD disc menu to have the digital surround enabled providing that the disc is encoded with Dolby Digital 5. 1 (please refer to the DVD player and DVD disc instruction) Example 3: LD: You may need to select a different Audio Channel on your LD (refer to your LD player manual) 8. Adjust volume knob accordingly 15 Operating your Receiver Operating the Radio The receiver has a built-in tuner that allows for AM/FM radio function. 5- Tune the stations by pressing TUNING UP or DOWN repeatedly until the desired station is found. Alternatively, you can press and hold TUNING UP or DOWN for about one second to activate the automatic SEARCH function. In this mode the receiver will automatically tune frequencies until it finds a station Manual tuning 1. Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details) 2. [. . . ] · A unit purchased or serviced outside the U. S. A. · Acts of nature, such as but not limited to lightning damage. If you purchased your unit outside the United States: · This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. [. . . ]