User manual CARLO GAVAZZI INPUT-OUTPUT POWER SUPPLY MODULES CONFIGURATION SOFTWARE

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CARLO GAVAZZI INPUT-OUTPUT POWER SUPPLY MODULES. We hope that this CARLO GAVAZZI INPUT-OUTPUT POWER SUPPLY MODULES user guide will be useful to you.

Lastmanuals help download the user guide CARLO GAVAZZI INPUT-OUTPUT POWER SUPPLY MODULES.

Mode d'emploi CARLO GAVAZZI INPUT-OUTPUT POWER SUPPLY MODULES

Download

Manual abstract: user guide CARLO GAVAZZI INPUT-OUTPUT POWER SUPPLY MODULESCONFIGURATION SOFTWARE

Detailed instructions for use are in the User's Guide.

 [. . . ] The RS232 auxiliary port is not insulated with reference to the measuring inputs.  [. . . ] Should the instrument not be provided with RS485 serial module,  the programming parameters may be uploaded and set in the instrument by means of auxiliary RS232 serial connection located on the side of the measuring input module (fig. 1 a) using the special connecting cable (available on request). Use: key-pad lock,  display hold or reset of alarms with latch. 1 max; 200  up to 10  max; TC: internal cold junction,  compensation within the temperature range from 0 to +50°C. Insulation by means of opto-couplers: 4000VRMS output to measuring inputs,  4000 VRMS output to power supply input. IMPORTANT: the line terminalization must be carried out only on the last BR SX module of the network,  moving the relevant jumper to position ON as shown in figure 2. Alarm type: active alarm for out-of-scale,  up alarm,  down alarm,  down alarm with disabling at power on,  up alarm with latch,  down alarm with latch. Number of outputs: 1 with BO R1 module (relay output); 2,  independent,  with BO R2 module (2 relay outputs); 4,  independent,  with BO R4 module (2 relay outputs + 2 open collector outputs),  4 independent with BO R5 (4 relay outputs).  [. . . ] WARNING: when the programming bus is used (10 pins),  the display is deactivated (it is switched off or it displays random symbols).  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CARLO GAVAZZI INPUT-OUTPUT POWER SUPPLY MODULES

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CARLO GAVAZZI INPUT-OUTPUT POWER SUPPLY MODULES will begin.