User manual CARROM PREMIUM FOOSBALL

[. . . ] Automatic Document Feeder (ADF) Tray (MP Tray) User’s Guide ADF Support Drum Unit Assembly (including Toner Cartridge) AC Power Cord Telephone Line Cord Carton components may differ from one country to another. Save all packing materials and the carton. ■ The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface you intend to use (Parallel or USB). ■ For Parallel use a bi-directional shield interface cable that is IEEE 1284-compliant, and not longer than 6 feet (2 meters). [. . . ] Please read this file for troubleshooting information and then close the file to continue installation. Setting Up the Machine Step 2 Installing the Driver & Software For USB Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP) Brother Native driver Installation M Click on Have Disk. J Click Start and select Printers and Faxes. Click on Add a printer and the Add Printer Wizard will start. When this screen appears, click Next. N Browse the CD-ROM and highlight your language folder and click Open. Highlight the WXP folder and click Open. Highlight the Addprt folder and click Open. K Un-check the Automatically detect and install my Plug and Play printer selection and then click Next. O Click Open. L Select USBXXX from the pull down window for the Printer Port Selection and then click Next. P Make sure X:\ENG\WXP\Addprt is displayed in the window and click OK (X:\ is the drive letter of your CD-ROM). 21 Q V Please install USB printer. When the Windows Logo testing screen appears, click Continue Anyway. Installing the Driver & Software 22 For Administrators R The model you are installing will be listed in the window. Select Yes or No if you want this driver to be your default printer. There will be two Brother printer drivers listed in the Printers selection. The driver with “Printer” after the model name (ex. Brother MFC-8820D Printer) is the Brother Native Driver. S If this screen appears, select Do not share this printer and Next. The Brother Native Drivers have been installed and the installation is now complete. T Select Yes and Next to print a test page. Windows® USB Highlight the model you are installing from the list of machines and click Next. U When this screen appears, click Finish. Setting Up the Machine Step 2 Installing the Driver & Software For Parallel Interface Cable Users (For Windows® 95/98/98SE/Me/2000 Professional/XP) Make sure that you have completed the instructions from Step 1 “Setting Up the Machine” on pages 2 - 8. 1 Switch off and unplug the MFC from the AC outlet and disconnect it from your computer, if you already connected an interface cable. 5 Click MFL-Pro Suite in Main Application. 2 3 Turn on your computer. (For Windows® 2000 Professional/XP, you must be logged on as the administrator. ) Insert the supplied CD-ROM for Windows® into your CD-ROM drive. If the model name screen appears, select your machine. If the language screen appears, select your language. MFL-Pro Suite includes Printer Driver, Scanner Driver, ScanSoft ® PaperPort ®, ScanSoft ® TextBridge ®, PC-FAX software, Remote Setup and True Type fonts. If you click No the Scan keys on the MFC will be disabled. Brother Native driver Installation N Click Start and select Settings and then Printers. Click on Add a printer and the Add Printer Wizard will start. When this screen appears, click Next. O Un-check the Automatically detect and install my Plug and Play printer selection and then click Next. A Basic Universal printer driver was installed with the MFL-PRO Software Suite which is certified for use with Windows operating systems. Brother also offers a full featured printer driver (Native driver) that includes more features than the Basic Universal driver. However, this driver does not include a Windows certificate. To install the Brother Native driver proceed to step N. For details on what features are available see chapter 12 of the User’s Guide. P Select BMFC (Brother MFL Port) from the pull down window for the Printer Port Selection and then click Next. Installing the Driver & Software 28 For Administrators Even if you select No, later you will be able to launch the Brother Control Center to use the Scan key by double clicking the Smart UI icon on the desktop. This loads the Brother Control Center to the task tray. See AutoLoad the Brother Control Center, Chapter 14 in the Dcumentation (User’s Guide) located on the CD-ROM. Continued . . . Windows® Parallel Setting Up the Machine Step 2 Installing the Driver & Software For Parallel Interface Cable Users (For Windows® 95/98/98SE/Me/2000 Professional/XP) Q Click on Have Disk. U Highlight the model you are installing from the list of machines and click Next. R Browse the CD-ROM and highlight your language folder and click Open. Highlight the W2K folder and click Open. Highlight the Addprt folder and click Open. Do not install USB printer. V The model you are installing will be listed in the window. Select Yes or No if you want this driver to be your default printer. S Click Open. W If this screen appears, select Do not share this printer and Next. T Make sure X:\ENG\W2K\Addprt is displayed in the window and click OK (X:\ is the drive letter of your CD-ROM). X Select Yes and Next to print a test page. 29 Y When this screen appears, click Finish. Z If the Digital Signature Not Found dialog box appears, click Yes. Installing the Driver & Software 30 [ If the test page printed, click OK. There will be two Brother printer drivers listed in the Printers selection. [. . . ] button. The setup is now complete. D Select AppleTalk. For user’s of Mac OS® 10. 2. 2 Please see Network User’s Guide Chapter 7 on the CD-ROM for information about using Rendezvous. Setting Up the Machine ■ For Administrators This section is for using the printer on a network. An administrator should set up the printer using the following steps. Network User's Guide Chapter Map (NC-9100h) Windows® 95/98/ME Peer-to-Peer Brother Internet Print Netware Windows NT® Peer-to-Peer TCP/IP NetBIOS TCP/IP IPX/SPX TCP/IP NetBIOS DLC/LLC Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 2 Chapter 4 Chapter 8 Chapter 5 Chapter 6 Chapter 2 Chapter 4 Chapter 8 Chapter 2 Chapter 5 Chapter 6 Chapter 1 Chapter 7 Chapter 7 Chapter 7 Chapter 2 Chapter 4 Peer-to-Peer Printing NetBIOS Peer-to-Peer Printing Configuring Internet Print for Windows® Novell Netware Printing TCP/IP Printing NetBIOS Peer-to-Peer Printing DLC Printing Configuring Internet Print for Windows® Novell Netware Printing TCP/IP Printing NetBIOS Peer-to-Peer Printing DLC Printing TCP/IP Printing Configuring Internet Print for Windows® Novell Netware Printing UNIX Printing Apple talk (Ether Talk TCP/IP Printing) Apple talk (Ether Talk TCP/IP Printing) Rendezvous Printing TCP/IP Printing NetBIOS Peer-to-Peer Printing Brother Internet Print (NT® 4. 0 only) Netware Windows® 2000/XP Peer-to-Peer TCP/IP IPX/SPX TCP/IP NetBIOS (Windows® 2000 only) DLC/LLC IPP (Internet Printing Protocol) Brother Internet Print Netware UNIX/Linux Macintosh® TCP/IP TCP/IP IPX/SPX TCP/IP AppleTalk TCP/IP Rendezvous OS2 Warp Server LAN Server TCP/IP NetBIOS 49 1 Insert the supplied CD-ROM for Windows® into your CD-ROM drive. The opening screen will appear automatically. Follow the on-screen instructions. 3 Click Network Applications for Optional NC9100h. 2 Click the Install Software icon on the menu screen. Windows NT® 4. 0 Parallel 4 Click BRAdmin Professional and follow the on-screen instructions. Web BRAdmin (Windows® Users Only) Brother has also developed Web BRAdmin, an enterprise network software utility that enables management of Brother and other SNMP compliant devices in larger LAN/WAN environments. [. . . ]