User manual CARROM SKITTLES

[. . . ] Adjust the guides to the position for the paper size you are using. Fan the paper well. Press and slide (Example for the U. K. ) C. Make sure the print side is toward the fax machine and the paper level is stacked below the paper mark. The feeder can hold up to 200 sheets of paper, or up to 10 envelopes. Mains Power Cord Turn the power switch ON. Load the paper with the lever down Complete reading this guide before connecting the Parallel or USB cables. [. . . ] The CD-ROM main menu will appear. 3. Click Install Software. 4. Click MFC Software Suite in Main Application. Please see Note*1. 5. Click Install. 6. The InstallShield Wizard Setup window will appear briefly, followed by the PaperPort® Setup window. Click Yes. 7. When the PaperPort® Setup window displays your Name and Company, either change or accept them, and then click Next. 8. When the Choose Destination Location window displays the path where the PaperPort® files will be installed, either change or accept, and then click Next. 9. When the Register Today screen appears, click Next. This is registration for Paper Port®. Follow the instructions. For Parallel For USB 10. When the MFC Software Suite Installation window appears, click Next to begin installing the MFC Software Suite. When the Setup Type window appears, select Standard, and then click Next. The application files will be copied to your computer. 12. The Connect Cable window will appear. *1 MFC Software Suite includes Printer Driver, Scanner Driver, ScanSoft™ PaperPort®, ScanSoft™ Text Bridge® software, Remote Setup and True Type fonts. PaperPort® is a document management application for viewing scanned documents. ScanSoft™ TextBridge®, which is integrated into PaperPort®, is an OCR application that converts an image into text and inserts it into your default word processor package. *2 If an error message appears during the installation process, or you have previously installed MFC Software Suite or MFL Pro, you will first have to uninstall it. If you click No the Scan keys on the MFC will be disabled. Please see Note*3. 2. Select Finish to restart your computer. 3. Click Yes to have the Control Centre loaded each time Windows® is started. The Control Centre will appear as an icon in the task tray. If you click No the Scan keys on the MFC will be disabled. Please see Note*3. Printer and Scanner drivers have been installed and the installation is now complete. Printer and Scanner drivers have been installed and the installation is now complete. –3– For Windows NT® Workstation Version 4. 0 Users Step 1. Check that your computer is turned on. Step 3. Step 4. Turn the MFC power switch ON. Follow the instructions on the screen. 12. Select Yes to restart your computer, and then click Finish. You must be logged on as the Administrator. Step 2. A. B. Connect the MFC to your PC with the Parallel Cable. (Same step as Windows 95/98/98SE/Me/2000 Users Step 3. , 1-11) Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips. Connect the interface cable to the printer port of the computer and secure it with the two screws. [. . . ] Please see Note*3. Printer and Scanner drivers have been installed and the installation is now complete. For Apple® Macintosh® Step 1. Make sure your MFC power switch is turned OFF and your Macintosh is turned ON. QuickDraw® Driver for OS 8. 6/9. 0/9. 0. 4/9. 1 Users Step 4. Step 5. Connect the Filter Core and Cable Tie to the USB cable. Connect the MFC to your Macintosh with the USB cable, and then turn the MFC power switch ON. Make sure you do NOT connect your MFC to your Macintosh. Step 2. Insert the CD-ROM into your CDROM drive. 1. When the window appears, doubleclick MFC Software Suite Installer. Installing MFC Software Suite Select your language 2. Click your language to install the printer and scanner drivers. After the installation is completed, the screen prompts you to restart your Macintosh. Step 6. Select the Printer. 1. 2. From the Apple menu, open the Chooser. [. . . ]