User manual CARROM SUPER SOCCER

[. . . ] Close the top cover. (For A4 letter paper) 4 Load Paper 5 Press and slide A. Adjust the guides to the position for the paper size you are using. Make sure the print side is toward the fax machine and the paper level is stacked below the paper mark. The feeder can hold up to 200 sheets of paper, or up to 10 envelopes. Install Mains Power Cord and Telephone Line Cord 6 Sharing a Single Line with a Telephone Answering Device (TAD) or an External Telephone Mains Power Cord TAD TAD (Example for the U. K. ) Telephone Line Cord (Example for the U. K. ) External Telephone Extension Telephone Turn the power switch ON. Load the paper with the lever down Do Not connect the Parallel or USB Cable. 7 Selecting Receive Mode 2 8 Set Date and Time 1 9 Set Station ID 1 A. [. . . ] Enter two digits for the month and press Menu/Set. DAY:XX ENTER & SET KEY For use with an external answering device. The TAD answers every call and stores voice messages. Make sure that TAD is connected to the external jack. MANUAL D. Enter two digits for the day and press Menu/Set. TIME:XX:XX ENTER & SET KEY D. Enter your name using the dial pad and the chart below, then press Menu/Set. For more details, see Entering Text in Owner’s Manual. Press Key 2 3 4 5 6 7 8 9 once A D G J M P T W twice B E H K N Q U X three times four times five times C F I L O R V Y 2 3 4 5 6 S 8 Z A D G J M 7 T 9 E. Enter the time in 24-hour format and press Menu/Set. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. –1– You control the phone line and must answer every call yourself. For more details, see Receive Mode Settings in Owner’s Manual. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. Version A Setting Up the MFC and PC to Work Together Before You begin • • You must set up the hardware and install the Brother Drivers before you can use your MFC as a printer and scanner in any Windows® application. The installation of the Brother driver will automatically start. Follow the instructions on the screen. ( For Windows® 2000 Professional User ) ( For Windows® 95/98/98SE/Me Users ) 1. In the Connect Cable window, click Next. 2. When the above screen appears, click Finish and wait as the PC restarts Windows® and continues the installation. 1. In the Connect Cable window, click Next. 2. When the above screen appears, Click Finish and wait as the PC restarts Windows® and continues the installation. 3. Click Yes to have the Control Centre loaded each time Windows® is started. The Control Centre will appear as an icon in the task tray. If you click No the Scan keys on the MFC will be disabled. Please see Note*3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 3. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. Click Yes to have the Control Centre loaded each time Windows® is started. The Control Centre will appear as an icon in the task tray. If you click No the Scan keys on the MFC will be disabled. Please see Note*3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. Step 4. Step 5. Step 6. For USB interface cable users Turn the MFC power switch ON. Connect the Filter Core and Cable Tie to the USB cable, and then connect the MFC to your PC with the USB cable. (It will take a few seconds for the installation screen to appear. ) The installation of the Brother driver will automatically start. [. . . ] If you click No the Scan keys on the MFC will be disabled. Please see Note*3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. –3– For Windows NT® Workstation Version 4. 0 Users Step 1. Check that your computer is turned on. Step 3. Step 4. Turn the MFC power switch ON. Follow the instructions on the screen. 11. [. . . ]