User manual CARVIN AC120

[. . . ] The AC120 is a durable unit constructed of 18 GA steel and ready for the road. You'll find the AC120 Power Conditioner an invaluable addition to your rack. 8 9 10 NOTE: The AC120 is fitted with a 15AMP circuit breaker so the maximum total current available to the all eight outlets is 15AMPS. A maximum of one high powered amplifier can be plugged into the AC120 (such as DCM1000's and larger). 2. LAMP SWITCH The Lamp switch is off in the center position. [. . . ] SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to reship your unit, always use the original carton and packing material. This will provide the best possible protection during shipment. CARVIN and the shipping company are not liable for any damage caused by improper packing. It will be required for warranty service if needed in the future. If you find items missing, they may have been shipped separately. Please allow several days for the rest of your order to arrive before inquiring. RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this manual for your records. Keep your portion of the card and return the portion with your name and comments to us. For your records, you may wish to record the following information. Serial No. _____________________ Invoice Date_______________ 76-00120 1099 9. CIRCUIT BREAKER A 15A circuit breaker is provided for over current protection. 10. AC OUTLETS The rear AC outlets have been positioned to allow for up to four "wall-warts" and four standard spaced plugs to be used simultaneously. Before plugging gear into the AC120, check voltage level on the LINE VOLTAGE meter and verify that it is in the safe range specified by the gear manufacture. Also be sure to verify that the green SAFETY GROUND indicator is illuminated. AC120 SPECIFICATIONS: PROTECTION One EMI Filter & Three Transient/Surge Absorbers Circuit Breaker 15A Power Rating 120V - 15A - 1800VA Dimensions 1 3/4" H x 19" W x 6 1/2" D Weight 7 lbs 12340 World Trade Drive, San Diego, CA 92128 (800) 854-2235 www. carvin. com LAMP replacement For Lamp replacement do, the following: 1. Turn off the AC120 and let lamp tubes cool if needed. With the other hand, hold tube cap, turn cap clockwise one click and pull cap off. With finger, nudge lamp out while pushing the tube back into AC120 chassis. Unscrew lamp from socket and replace bulb. Be sure to line up the lower flat sides of lamp socket with the double guides inside of lamp tubes. Lamp should seat all the way inside of tube inorder for light to shine through tube light hole. Hold tube with one hand place tube cap on tube with the other hand and turn one click counter clockwise. [. . . ] SERVICING: The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer to replacement text on the unit for correct fuse type. SAFETY INSTRUCTIONS (EUROPEAN) The conductors in the AC power cord are colored in accordance with the following code. GREEN & YELLOW--Earth BLUE--Neutral BROWN--Live U. K. [. . . ]