User manual CARVIN B400

[. . . ] CARVIN ENGINEERING DATA B400 Battery Kit for StageMateTM S400/S400D Installation Instructions The B400 Battery Kit is for replacing a worn battery in a S400/S400D StageMateTM or use as a second battery to extend battery time. The B400 Battery Kit comes with the following: 1 B400 12V Battery, a set of color coded battery connection wires and an L-bracket and screw. [. . . ] The original battery on the left has spare terminals for connecting the second battery. Simply connect the supplied B400 battery wires to the negative and positive terminals on the original battery. Always match negative (-) to negative and positive (+) to positive. Black is used for negative (-) and red for positive (+). Never allow a negative wire or terminal to touch a positive wire or terminal or "sparks will fly" with possible damage to the battery. If in doubt, please call our service department Mon. at 800-854-2235. REPLACING THE BATTERY After a few years of use, if you notice your operation time has been greatly reduced, you will need to replace the battery as the cells may have weakened with age. The B400 battery kit is shipped with connecting wires for use as a second battery. If you are replacing your old battery, discard these wires as you will not need them. A) To replace your battery, remove the 4 screws from the SoundMatesTM rear chassis and carefully remove the chassis from the cabinet. [. . . ] Black is used for negative (-) and red for positive (+). Be sure not to short the battery terminals with a screwdriver or "sparks will fly" with possible damage to the battery. bl ac k re d bla + ed blac r k ck re d blac re black black + d red + k red + L bracket second battery FIG 1 Cutaway view FIG 2 Cutaway view L bracket battery connection wires (shipped with B400 kit) To order accessories for your StageMateTM call 800-854-2235 or visit our online catalog [. . . ]