User manual CARVIN LSX1502A

[. . . ] LSx1002 System Type: Frequency Response: Coverage Pattern: Crossover: Crossover Frequency: Sensitivity (1w @ 1m)/ Max SPL: LF Driver: HF Driver: Power: Nominal Impedance full range: Bi-amp LF: Bi-amp HF: Suspension/Mounting: Connectors: Dimensions (H x W x D): Net Wt: Optional Accessories: 10-inch 2-Way, bass-reflex 72 Hz ­ 20 kHz (-10DB) 85 Hz ­ 18 kHz (-3 dB) 60 degree round 2-Way 3. 5 k Hz 98dB /121dB 10-inch woofer 1-inch titanium Continuous / Program / Peak 8 ohms 200w /400w /800 LSx1202 12-inch 2-Way, bass-reflex 70 Hz ­ 20 kHz (-10DB) 76 Hz ­ 18 kHz (-3 dB) 90H x 60V 2-Way with Speaker GuardTM HF 2. 5 k Hz 97dB /122dB 12-inch woofer 1-inch titanium Continuous / Program / Peak 8 ohms 300w /600w /1200 8 ohms 300w /600w /1200w 8 ohms 50w /100w /200w 1-3/8-inch pole mount cup Two NL-4 Neutrik Speakon's Two ¼ TS phone jacks 23 in x 15. 5 in x 11. 75 in 585 mm x 395 mm x 300 mm 33 lb (15 kg) CVS1202B cover LSx1202A Active Bi-amp system LSx1202M 12-inch 2-Way, bass-reflex 70 Hz ­ 20 kHz (-10DB) 76 Hz ­ 18 kHz (-3 dB) 90H x 60V 2-Way with Speaker GuardTM HF 2. 5 k Hz 97dB / 122dB 12-inch woofer 1-inch titanium Continuous / Program / Peak 8 ohms 300w /600w /1200 8 ohms 300w /600w /1200w 8 ohms 50w /100w /200w none Two NL-4 Neutrik Speakon's Two ¼ phone jacks 22. 75 in x 15. 5 in x 14. 75 in 580 mm x 395 mm x 375 mm 33 lb (15 kg) CVS1202MA cover LSx1202MA Active Bi-amp system CARVIN ENGINEERING DATA LSx (LIVE SOUND) LOUDSPEAKERS Carvin's new LSx (Live Sound) Series loudspeakers give new meaning to high performance loudspeaker systems for today's club scene. Building upon the company's long-standing reputation for state-of-theart systems offering great sonic performance coupled with proven reliability and solid value, the new LSx Series loudspeakers deliver all the features musicians and mobile DJs demand. Consisting of ten models encompassing five 2-way systems, three 3-way systems, and two subwoofer systems, the LSx Series is ideally suited to address a wide range of sound reinforcement system requirements--from intimate clubs to large scale, high impact music venues. With key features like steel grills to protect the drivers, recessed steel handles for easy transport, high order ­ low loss biampable crossovers that ensure high intelligibility of spoken word and accurate reproduction of music sources, plus Neutrik SpeakonTM and quarter-inch connectors across all models, Carvin's new LSx Series loudspeakers are just what your audience has been waiting for! [. . . ] If the system should go into protect mode, the LED will indicate YELLOW and the power amps will shut off. This may occur if; a) the system is overheated due to clipping the power amps for an extended period of time, b) one of the internal drivers developed a short or c) the power amps require service. poWeR Push this switch to the UP position to apply power to the unit. The POWER LED will light to show the system is on. For high powered and biamp applications, use SpeakonTM cables only. 1/4" inputs from power amp output (full range input only). SpeakonTM input from power amp (full range or biamp). Note: the Speakon pin configuration for biamping is: 1+ LF Positive / 1- LF Negative 2+ MF/HF Positive / 2- MF/HF Negative 3. SpeakonTM through wired in parallel with input SpeakonTM. 1/4" through wired in parallel with 1/4" input. MULti-Way cRossoveR connections (non-powered speakers) Use sUBWooFeR cRossoveR connections 1. Note: the Speakon pin configeration is: 1+ LF Positive / 1- LF Negative 2+ not connected / 2- not connected 3. Crossover/Bypass mode switch to bypass internal crossover (must use active crossover when in bypass mode) 4. SpeakonTM through wired in parallel with input SpeakonTM. 1/4" through wired in parallel with 1/4" input. aps Bi-aMp/tRi-aMp ReaR paneL: 3 MID 0 +3 -6 +6 0 MID SWEEP 1kHz -3 100Hz 5kHz HIGH 0 +3 +6 sUggestions FoR optiMaL peRFoRMance EQ IN -6 All loudspeaker components are Time-Aligned for greater intelligibility and clarity TIME-ALIGNED BI-AMP SYSTEM 300 W RMS 742A LEVEL +6 -12 LOW * 0 MID 0 +3 -3 PROTECT YELLOW CLIP RED CAUTION ± TO PREVENT ELECTRICAL SHOCK DO NOT DEFEAT THE SAFETY GROUND ON THE POWER CORD. WARNING ± TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL. ! US A RISK OF ELECTRIC SHOCK DO NOT OPEN MADE IN THE CAUTION POWER MID SWEEP 1kHz GREEN Serial No. 120VAC -3 · To help control feedback and to correct for venue characteristics, use a graphic EQ. · For optimal coverage and dispersion, elevate high frequency horn above eye level. · For optimal headroom, select an amplifier with a power capacity equal to or up to double the rated program power capacity of the loudspeaker system. · Ensure all amplifiers are supplied and connected to properly rated AC power circuits. Underpowering amplifiers may cause premature clipping distortion. Speakon Connector 60Hz 300VA HIGH 0 +3 +6 speaKeR caBLes Use either Carvin's PRO50S speaker cable for up to 50' or high- -3 +3 -6 +6 0 100Hz 5kHz THRU OUTPUT -6 +6 EQ IN * Lsx1801 sUBWooFeR RED 7. cRossoveR FReQUency sWitcH The CROSSOVER FREQUENCY switch -12 +6 TIME-ALIGNED TRIAMPED SYSTEM 1 900W RMS 1588A INPUT -6 4 5 LEVEL * TIME IN DISTANCE + CROSSOVER PHASE SHIFT ATTENUATION dB Low Frequency Low Pass Filter High Frequency High Pass Filter Serial generally used with small selects the crossover point for the APS. [. . . ] Do not install near heat sources such as radiators, stoves or other products that produce heat. Use only mounting hardware such as brackets and tripods recommended by the manufacturer. SERVICING: The user should not attempt to service the unit. All servicing should be referred to qualified service personnel. [. . . ]