User manual CASIO 2747

[. . . ] MA0303-A USER'S GUIDE 2747 About This Manual Button operations are indicated using the letters shown in the illustration. Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the "Reference" section. General Guide Press C to change from mode to mode. After you perform an operation (except for B) in any mode, pressing C returns to the Timekeeping Mode. [. . . ] While the hour or minutes setting is selected (flashing), use D (+) and B (­) to change it. Press A to exit the setting screen. You can input spaces, alpha characters, symbols, and numbers in a name. For details, see the "Character List". When the character you want is at the cursor position, press C to move the cursor to the right. Repeat steps 3 and 4 until the name is complete. You can input up to eight characters for the name. After you input the name, press C as many times as necessary to move the cursor to the number field. You tell when you are in the name field because of the long cursor ( _). The number field has a short cursor (_). The name field has spaces for eight characters, so you must press C to move the past the 8th character in order to get to the number field. The number field has spaces for 16 digits. Pressing C until the cursor moves past the 16th digit causes it to jump back to the first character of the name field. Use D and B to change the character at the cursor position in the number field. The character changes in the following sequence. Press Press . (space) to To view the time in another city code In the World Time Mode, press D to scroll through city codes. To toggle a city code time between Standard Time and Daylight Saving Time 1. In the World Time Mode, use D to display the city code whose Standard Time/Daylight Saving Time setting you want to change. Hold down A until the DST On/Off setting of the world time starts to flash, which indicates the setting screen. Press D to toggle between Daylight Saving Time (ON displayed) and Standard Time (OFF displayed). Press A to exit the setting screen. The DST indicator appears on the World Time Mode display to indicate that Daylight Saving Time is turned on. The above operation toggles all World Time city codes between Daylight Saving Time and Standard Time. Note that you cannot make settings for individual city codes. Alarms AM indicator 8. [. . . ] · An on indicator on the display flashes while its corresponding alarm operation is sounding. · The snooze alarm on indicator flashes during the 5-minute intervals between alarms. Countdown Timer Seconds The countdown timer can be set within a range of one minute to 24 hours. An alarm sounds when the countdown reaches zero. · All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C. Display Illumination Precautions The light that illuminates the face uses two LEDs (light-emitting diode) and a light guide panel that cause the display to glow for easy reading in the dark. [. . . ]