User manual CASIO AT1

[. . . ] It also includes a PDF-format "USB Function Guide" for models equipped with USB ports, and a "Wireless Function Guide". The CD-ROM also provides copies of the following software. · Wireless Connection 3 · EZ-Converter FA · ArcSoft MediaConverter 3 for CASIO Projector · Multi Projection Camera Update Software DLP is a registered trademark of Texas Instruments Incorporated of the United States. Microsoft, Windows, Windows Vista, and PowerPoint are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. [. . . ] The areas near the exhaust vents also become quite hot. Never locate objects made of plastic or other heat-sensitive materials near or under the projector. Doing so creates the risk of deformation and discoloration of the object. Looking into the lens or vents while light source unit is on Never look directly into the lens or vents while light source unit is on. The strong light emitted by the projector creates the risk of eye damage. Lens cover Be sure to remove the lens cover before turning on the projector. Never leave the lens cover attached while the projector is in use. Blocking the vents Never allow the vents to become blocked. Doing so causes internal heat build up, which creates the risk of fire and breakdown of the projector. Touching the projector while it is hot creates the risk of burn injury. Make sure that you always observe the following precautions. · Allow at least 30cm (11. 8 inches) between the projector and walls. · Do not insert the projector into any space where air circulation is poor. · Never cover the projector with a blanket or any similar item. Water creates the risk of fire and electric shock. + - Radio waves emitted by the wireless adapter (which is provided with some projector models) Never use this product inside of an aircraft or medical facility, or in any other location where use of such devices is prohibited. Radio waves can have an effect on the operation of electronic equipment and medical equipment, and cause accidents. Do not use this product in the vicinity of high-precision electronic instruments or electronic devices that handle weak radio signals. Radio waves can have an effect on the operation of such equipment, and cause accidents. · If you are using a pace maker or any other electronic medical device, be sure to consult your physician or device manufacturer before using this product. + Backup of important data Be sure to keep separate written records of all data stored in projector memory. Memory data can be lost due to breakdown, maintenance, etc. During projection, make sure there is nothing in front of the lens blocking the light. An object in front of the lens creates the risk of fire. Lens effect Never have an aquarium or any other object that produces a lens effect in front of the projector while the light source unit is on. Note that you will be charged for cleaning. * Caution Misuse of batteries can cause them to leak and stain the area around them, or to explode, creating the risk of fire and personal injury. Make sure that you always observe the following precaution. · Use only the type of batteries that is specified for the remote controller. Dead batteries Be sure to remove batteries from the remote controller as soon as they go dead. · Remove batteries from the remote controller if you do not plan to use it for a long time. Disposing of batteries Make sure that you dispose of used batteries in accordance with the rules and regulations in your local area. E-5 Operating Precautions About the Light Source Unit The projector's light source unit uses a laser and LED. The life of the light source unit is rated at approximately 20, 000 hours. [. . . ] After you finish projecting, press the [P] (Power) key. This will cause a power down confirmation message to appear. Press the [P] (Power) key again to turn off the projector. NOTE This product is also designed for IT power distribution system with phase-to-phase voltage 230V. If you run into problems. . . If you experience any problems while operating the projector or if you suspect that the projector is not operating properly, refer to the "Troubleshooting" section in the User's Guide (UsersGuide_English. pdf), which is on the CD-ROM that comes with the projector. E-10 Main Specifications Model Name Brightness (ANSI Lumens) Environment Power Approximate Dimensions Weight Specifications are subject to change without notice. XJ-A141/XJ-A146/ XJ-A241/XJ-A246 2500 XJ-A251/AT1 3000 Operating Temperature: 5 to 35°C (41 to 95°F) Operating Humidity: 20 to 80% (non-condensation) Operating Altitude: 0 to 3, 000 meters (0 to 10, 000 feet) above sea level Requirements 100-240V AC, 50/60Hz, 3. 3A-1. 4A 297 (W) × 210 (D) × 43 (H) mm (11. 7" × 8. 3" × 1. 7") Approximately 2. 3kg (5. 1Ibs) E-11 GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U. S. A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]