User manual CASIO CASSIOPEIA MPC-205

[. . . ] FIVA User's Guide (Product No. : MPC-205E/206E) P1 P2 P3 MODE B MODE A LA N Thank you for purchasing the CASIO MPC-205E/206E. This guide describes the basic operations of the MPC-205E/206E. Read this guide in its entirely before handling or operating this products, and keep it close at hand so it can easily referenced. International ENERGY STAR® Program As a member of the International ENERGY STAR® Program, CASIO products have been judged to meet International ENERGY STAR® standards. ENERGY STAR® is a U. S. registered mark. The information regarding International ENERGY STAR® Program attached to this product and found in its manual, advertising pamphlets, and so on, is applicable under our Power Management software in Windows Me. [. . . ] To avoid this, do not start up an application that causes frequent accesses to the hard disk. Also, do not connect the peripherals or access them before completing the dial-up connection. 63 Connecting to the USB port The USB (Universal Serial Bus) is a standard interface specification for the connections of the USB compatible peripherals such as a keyboard, mouse, printer, scanner, etc. Connecting to or disconnecting from the USB port can be performed even when the power of this unit is turned on. Insert the plug of the USB cable to the USB port securely with the plug's mark ( ) facing upwards. P1 P2 P3 EB MODMODE B DE A MOMODE A LA N Important · When this unit enters the Sleep Mode such as the Hibernation or Standby Mode while USB devices are connected, the USB devices may not be used after the unit is restored from the Sleep Mode. In this case, re-connect the USB devices or restart this unit. · The compatible system (OS) and the driver is required for using USB devices. · The performance of any USB compatible device connected to this unit must be checked thoroughly by the user. · If one USB port on this unit is not enough, use commercially available USB hub. USB hub with power-supply capability is recommended. Note 64 Using the floppy disk drive The optional USB compatible floppy disk drive (MPC-240FDD) is available for this unit. The two types of floppy disk can be used with this unit. One is 2DD floppy disk with the amount of 720 KB and the other is 2HD floppy disk with the amount of 1. 44 MB. (For details, see the manual that comes with the floppy disk drive. ) Connecting the floppy disk drive allows you to store data and to copy data to other computer. Connect the MPC-240FDD to the USB port of this unit. The access lamp on the floppy disk drive lights while data is being written to or recalled from a disk. Never remove the floppy disk from the drive while the access lamp is lit. Doing so may cause malfunction of the floppy disk drive or corruption of data. Note · When using the floppy disk that is not formatted for the Windows, formatting is required. However, the disk cannot be formatted to the disk with the amount of 1. 2 MB. · Once the disk is formatted, all data stored in the floppy disk is erased. · The floppy disk that is formatted on other computer may not be used. · The 2HD floppy disk that is formatted in the 2DD type cannot be used, and vice versa. Use a floppy disk that is formatted correctly. 3 To write protect a floppy disk Floppy disks have a write protect tab that you can use to protect the data on them from accidental deletion or change. Write protect tab Data cannot be written to Data can be written to or deleted from the disk. the disk. 65 Connecting a Printer A USB compatible printer can be connected to the USB port of this unit. Installing the printer driver is required for using the printer. The printer driver that comes with this unit or one (stored in a CD, floppy disk, etc. ) that comes with the printer can be used. [. . . ] Memory Slot VRAM Monitor Device*1 Monitor Functions Resolution Input Device Keyboard Operation buttons Pointing device Hard Disk Sound Functions LAN IEEE1394 Interfaces USB*2 RGB PC Card Slot*2 CF Card Slot Power Management Timekeeping Security MPC-205E MPC-206E Transmeta Crusoe TM5600 500MHz Transmeta Crusoe TM5600 600MHz 128KB (1), 512KB (2) 512KB 96MB/192MB 128MB/192MB 1 expansion slot 2MB (SMI LynxEM+) 8. 4-inch TFT color LCD SVGA (800 × 600 dots), 16, 770, 000 colors max. Built-in 80-key keyboard; hot keys (with Fn key), Windows/application keys, 16mm × 13mm (0. 63" × 0. 51") pitch, 1. 5mm stroke One touch operation buttons (E-mail, Internet, Memo) Stick 10GB 20GB Monaural speaker (built-in) Headphones (stereo mini jack) Monaural microphone (built-in) 10Base-T/100Base-TX ×1 × 1 (Connect the floppy disk drive such as MPC-240FDD, etc. ) ×1 Type II × 1 slot (Connect the CD-ROM drive such as MPC-142CDD, etc. ) Type I/II × 1 slot Auto or manual setting Clock battery backup Power on password Appendix 139 Power Requirements Input DC16V from AC adaptor (Input: 100V~240V AC, 50/60Hz) Lithium-ion battery, equipped as standard Standard Battery Pack: Approximately 4. 5 hours Large-capacity Battery Pack*2: Approximately 9 hours Power On: Approximately 2. 5 hours (5 hours with Largecapacity Battery Pack) Power Off: Approximately 2. 5 hours (5 hours with Largecapacity Battery Pack) 223 (W) × 197. 3 (D) × 21. 2 (24. 6) (H) mm (8. 78"(W) × 7. 77"(D) × 0. 84"(H)) 990g (2. 18lb) 204 (W) × 41 (D) × 24. 6 (H) mm 8. 03"(W) × 1. 62"(D) × 0. 97"(H)) 165 g (0. 36lb) Temperature: 5°C to 35°C (41°F to 95°F); Humidity: 30 to 80% (non-condensation) Battery Capacity*3 Battery Charge Time*3 Dimensions with standard battery pack Approximate weight with standard battery pack Standard battery pack dimensions Standard battery pack approx. weight Operating Environment *1 Though the FIVA TFT LCD is a very high quality display device, there may be times that brightness is uneven and when fine specs appear on the screen. Also, some dots may not illuminate or some dots may stay illuminated at all times. [. . . ]