User manual CASIO CTK-531

[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. [. . . ] Example: To select 001, enter 0 3 0 3 1. 2. To change to another song while demo playback is in progress, use (10-key) [­] and [+] keys to enter the song number you want (page E-4). This will cause demo playback to jump to the song whose number you entered. · You cannot use (10-key) number buttons to select a song. bq bq 3. To stop demo playback, press bl. Demo playback continues until you stop it by pressing bl. E-17 Playing Built-in Songs 3. Press bl. This starts playback of the song. Sustain pedal Key Note Skip Forward 1. Press 9. This skips song playback forward to the next measure. Holding down skips forward at high speed until you release it. · Pressing while song playback is stopped performs lesson function phrase skip forward (page E-22). 9 9 9 Beat Measure Tempo Fingering Measure number 4. Press bl again to stop playback. Song playback will continue (repeat) until you press stop it. You can cancel song repeat by pressing . 7 bl to Skip Back 1. Press 8. This skips song playback back to the previous measure. Press bl. This starts playback in accordance with the setting you selected in step 1. · During playback with one part turned off, only the notes of the part that is turned off are shown on the display. E-20 Using Built-in Songs to Master Keyboard Play 3 bp bq English 789 bl bm br bs bt ck cl Step Up Lesson Flow Step Up Lesson takes you through practice of the right hand part, left hand part, and both hand parts for each phrase of a song. Master all of the phrases and you master the song. Phrase 1 · Right Hand Lesson 1, 2, 3 · Left Hand Lesson 1, 2, 3 · Both Hand Lesson 1, 2, 3 To master a song, it is best to break it up into shorter parts (phrases), master the phrases, and then put everything together. Your Digital Keyboard comes with a Step Up Lesson feature that helps you to do just that. Phrases The built-in songs are pre-divided into phrases to help you master keyboard play. Song start Song end Final Phrase 4 Repeat the above to practice phrase 2, 3, 4, and so on, until you reach the final phrase of the song. Phrase 1 Phrase 2 Phrase 3 . . . . 4 After mastering all of the phrases, practice the entire song. 4 Now you have mastered the entire song! E-21 Using Built-in Songs to Master Keyboard Play Messages that Appear during Lessons The following are the messages that appear on the display during Step Lessons. Message <Phrase> Description Appears when you select a phrase, when a lesson starts, etc. · Note that certain phrases will cause "<Wait>" to appear instead of "<Phrase>". Appears when the lesson starts with an intro or fill-in phrase that is not included in the phrases to be practiced. Play toll advance automatically to the next phrase after the unincluded phrase plays, so wait until then to start playing on the keyboard. Appears when advancing automatically to the next phrase. This message appears following a phrase for which "<Wait>" (see above) is displayed, and during an Auto Step Up Lesson (page E-25). This message appears during Auto Step Up Lesson (page E-25) immediately before practice from Phrase 1 up until the phrase currently being practiced. [. . . ] Computer Connection I can't exchange data between the Digital Keyboard and a computer. While song playback is stopped or a Step Up Lesson is in progress, skip forward and skip back operations are performed in phrase units (page E-18). · Check to make sure that the USB cable is connected to the Digital Keyboard and computer, and that the device is selected correctly with your computer's music software settings (page E-34). · Turn off the Digital Keyboard and then exit the music software on your computer. Next, turn the Digital Keyboard back on and then restart the music software on your computer. E-39 English Notes are cut off whenever the number of notes being sounded exceeds the maximum polyphony value of 48 (24 for some tones). This does not indicate malfunction. Reference Specifications Model Keyboard Touch Response (CTK-3200 only) Maximum Polyphony Tones Built-in Tones Sampling Tones 400 1 (Full Sampling) or 3 (Short Sampling) Sampling Time: 1 second (Full Sampling) or approximately 0. 3 seconds each (Short Sampling) Effects: 10 types (for Full Sampling samples) 1 to 10, Off 5 pads × 4 sets (3 sets for sampled sounds, 1 set for percussion only) 0, 2 to 6 30 to 255 110 4 (Listen, Watch, Remember, Auto) L, R, LR Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation 20 notes 150 150 ±1 octaves (­12 to +12 semitones) A4 = 415. 5 to 465. 9 Hz (Initial Default: 440. 0 Hz) 16 multi-timbre received, GM Level 1 standard Tone, Rhythm, Song Bank numbers and names, staff notation, fingering, pedal operation, tempo, measure and beat number, chord name, etc. [. . . ]