User manual CASIO CW-L300

[. . . ] E CW-L300 User's Guide · We recommend that you print on a disc* before you record anything on it. Printing on a disc that already has data recorded on it can cause the data to become corrupted. · Note that CASIO COMPUTER CO. , LTD. shall not be held liable for any loss or corruption of data on discs arising through the use of this printer. [. . . ] A size specification does not span multiple blocks. 1×3 character size Auto Fit Character Size: the highlighting located at the HEIGHT value, use and to change the value. · Here we will change the value to 1. · You can also input a value with the number keys. · The printer will beep and not accept your input if you try to input a value that is not allowed. to move the highlighting to the WIDTH value. 5. Press · If you specified the HEIGHT value by pressing a number key, the highlighting will move the WIDTH value automatically. 6. Use and to change the WIDTH value, and then press SET. · Here we will change the value to 3. and to move the cursor to the first character of the string to which you want to apply the size setting, and then press SET. · Here, align the cursor with "N". 8. Use and to move the cursor to the last character of the string to which you want to apply the size setting, and then press SET. · Here we will select "No Smoking". Character Size Auto Fit Mark Character Size Mark E 32 Specifying the Size of Text Lines You can specify the size of text lines by selecting a format as shown below. Number of Lines Format 24 or 18mm Wide 12mm Wide 9mm Wide Number of Lines Format 24 or 18mm Wide 12mm Wide 9mm Wide 3 A 1 A B C D E 2 A B C D E F 1×1 2×2 3×3 4×4 5 × 5* 1×1 1×1 1×1 2×2 2×2 1×1 2×2 2×2 1×1 3 × 3* 3 × 3* 1×1 1×1 2×2 3 × 3* ­ ­ ­ ­ ­ ­ ­ ­ 1×1 2 × 2* ­ ­ ­ D ­ ­ ­ ­ ­ ­ C B 1×1 1×1 1×1 1×1 1×1 2 × 2* 1×1 2 × 2* 1×1 2 × 2* 1×1 1×1 ­ ­ ­ ­ ­ ­ ­ ­ Smaller when the label includes a frame. · The size of text lines cannot be specified in the case of 6mm wide tape. · The size of text lines cannot be specified if there are four or more lines of text. · The size of text lines cannot be specified if the label already contains size specifications for a string of characters. 33 E Example: Line 1: 1×1 Line 2: 3×3 ( Two lines, Format E 18mm wide tape ) 1. In the Free Design Mode, input the text you want. Use and to select LINE, and then press SET. 4. Use the cursor keys to select the format you want, and then press SET. Selected format Small Font · The printer has a Small Font setting, which it may select automatically depending on the number of lines (the number of text lines you input or the number of lines in the format you are using) and the tape width. An indicator appears next to the [SMALL FONT] indicator when the Small Font is in use. · An indicator like "2/5" appears for the label format indicator when the Small Font is selected. This indicates that the total number of lines is 5, and the cursor is currently located in line 2. Label format indicator Small Font Either of the following will cause a text line size specification to be cancelled automatically. · Changing the number of lines · Specifying the size of a string of characters (page 32) E · Note the following about the Small Font. - Font settings are not applied (everything is printed using the same font). [. . . ] SAME NAME ALREADY USED! Startup Guide, page 13 Startup Guide, pages 11 and 13 22 TOO MANY BL! · The layout already contains 15 block marks. · You are trying to save input text in phrase memory that contains more than 49 characters. Only the first 49 characters will be saved. Edit the text as required to make sure it is less than 50 characters long. TOO MANY CHARACTERS! [. . . ]