User manual CASIO DA-7

[. . . ] Keep this manual in an easily accessible location for future reference. · The warning symbols indicate important safety related information. To protect yourself and others from personal injury or damage to property, it is essential that you always heed the warnings and information provided. General Precautions q Do not leave the recorder in hot, humid locations such as inside a closed automobile under direct sunlight or on the beach in the summer. q Do not store the recorder in places exposed to excessive moisture or dust. [. . . ] "PLAY PAUSE" flashes on the display. Resume Playback Press the PLAY button again. Playback will resume at the point of interruption. Note The recorder stops when it has been left paused for 10 minutes or longer. Playback Functions Skip a File While Playing It Press the FF/+ button while playing a file. The recorder skips to the beginning of the next file and starts playing it. (If an index mark is encountered midway ( P. 26), playback begins at that position. ) Reverse Skip a File While Playing It Press the REW/­ button while playing a file. The recorder skips to the beginning of the current file and starts playing it. (If an index mark is encountered midway ( P. 26), playback begins at that position. ) Fast Playback Hold the PLAY button for 1 second or longer while playing a file. The recorder plays back at approximately 50% faster than the normal rate. · After fast playback is canceled, playback returns to normal rate. Canceling Fast Playback Hold the PLAY button for 1 second or longer again*. Particularly helpful for extended recording, the VCVA not only conserves memory by turning off recording during silent periods, but also makes playback more efficient and convenient. 1 Low 2 High 1 REC INDE X Start recording with the VCVA switch set to ON. When the volume falls to a preset level or lower, recording automatically pauses, and "STANDBY VCVA" flashes on the display. The record/play lamp glows when recording starts and flashes when recording pauses. STOP MEN U E ERAS 2 Using the VOLUME control, adjust the start/stop actuation level. The higher the VOLUME control is set, the more sensitive the start/stop level becomes, allowing recording to automatically begin at a quieter level. Using the Variable Control Voice Actuator ································································································ Notes · The start/stop actuation level also varies depending on the selected microphone sensitivity mode ( P. 17). · To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended. 24 Inserting Recordings into Previous Files Additional recordings can be inserted into previously recorded files. Existing file into which data is to be inserted The dog is cute. The dog is so cute. Data to be inserted 5 6 REC STOP MENU INDEX ERASE 1 1 3, 4 2 2 3 4 5 6 Press the FOLDER button to choose a folder. Press the FF/+ or REW/­ button to choose the file into which you want to insert additional recordings. Press the PLAY button to start playback. Press the PLAY button at the point where you want to insert a recording. Playback pauses. Inserting Recordings into Previous Files Press the REC button to start inserting additional recordings. The record/play indicator lamp glows red. Press the STOP button to stop inserting additional recordings. a Current folder b Existing file into which data is to be inserted ······················································································································································· Pause Insert Recording Pause Press the PLAY button. "INSERT PAUSE" flashes on the display. Resume Insert Recording Press the PLAY button again. Insert recording resumes. Notes · The recording time and date of the file into which recording has been inserted is updated to the time and date of when the inserted recording was recorded. · You cannot select any recording mode other than that of the original file before insert recording ( P. 18). 25 Index Marks Index marks can be incorporated into a file during recording or playback to make it easy to locate interesting information. Index marks enable faster access to important information by pressing the FF/+ or REW/­ button. Setting an Index Mark REC STOP MENU 1 INDEX Press the INDEX button during recording or playback to set an index mark. An index mark is set and the index number appears on the display. ERASE 1 1 2 Clearing an Index Mark REC STOP MENU INDEX ERASE 3 1 2 3 Play the file with the index mark you want to clear. Press the FF/+ or REW/­ button to choose the index mark to be cleared. Press the ERASE button while the index number appears for about 2 seconds on the display. The index mark is erased. Index Marks Index numbers are reassigned automatically. [. . . ] 11 hours (with alkaline batteries, based on our standard testing procedure) External dimensions 109. 5 x 50. 0 x 16. 7 mm (without protrusions) Weight 86 g (including batteries) * Specifications and design are subject to change without notice. * Battery life varies greatly according to type of batteries used and the conditions of use. 41 Specifications Accessories (optional) SmartMedia cards of 4, 8, 16, 32, and 64MB:M-4/8/16/32/64 Olympus CAMEDIA digital camera series 3 V (3. 3 V) SmartMedia memory cards can be used. PC card adapter:MA-2E Allows files to be transferred to a PC that has a PC card slot or PC card drive. FlashPath (floppy disk adapter):MAFP-2E Allows files to be transferred to a PC with a 3. 5" floppy disk drive. [. . . ]