User manual CASIO DQ-683

[. . . ] Be sure to remove the sticker before using the clock. · Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. Alarm Off Alarm On Snooze on indicator DATE (month - date) Day of the week Alarm time 2. While the screen you want is on the display, use the Alarm Time Set button (2) to change the digits that are 2 flashing. [. . . ] · Each press of + or ­ while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour and 24-hour timekeeping. After making the settings you want, use the SET button (3) to display the Normal Timekeeping Screen. 3 · The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. 1 USER'S GUIDE DQ-683 USING THE ALARM The alarm sounds and the backlight turns on when the alarm time you set is reached. You can also use the Alarm Switch (5) to select the snooze alarm feature. 5 USING THE LIGHT Pressing the Snooze/Light button (1) turns on the light and illuminates the display for easy reading in the dark. · Overuse of the light can shorten battery life. Setting the Alarm Time Use the Alarm Time Set button (2) to set the alarm time. 2 Pressing the Alarm Time Set button (2) causes the alarm time to appear in place of the date on the display. 2 Alarm Time Alarm Time Set button BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. Pressing down lightly on the battery compartment cover, slide it downwards and remove it. Make sure that their positive (+) and negative (­) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. Be sure to press the RESET button (4) after replacing batteries. 4 4 Press to change the alarm time setting (­). Press to change the alarm time setting (+). · Holding down + or ­ changes the digits at high speed. Battery precautions Be sure to load the batteries with their positive (+) and negative (­) ends facing correctly. Replace the batteries at least once a year, even if the current batteries are working properly. [. . . ] The alarm does not sound. SNZ ON Zz () ALM ON ( ) OFF · The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNZ. · The backlight also turns on for the first four seconds that the alarm sounds. · The alarm sound changes over five levels as it sounds. Stopping the Alarm · When alarm is sounding, press the Snooze/Light button (1) to stop it. [. . . ]