User manual CASIO DQ-970

[. . . ] 4 °C/°F button Press this button to toggle the temperature units between Celsius and Fahrenheit. 5 SET button Use this button when setting the current time. 6 RESET button Press this button to reset the clock after replacing its batteries. [. . . ] Screen is on the display toggles between 12-hour and 24-hour timekeeping. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen. · The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. °C/°F SET Alarm on indicator 1 Operation Guide DQ-970 USING THE ALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to select the snooze alarm feature. HYGROMETER FUNCTIONS A built-in sensor measures humidity and shows the measured value on the display. · The humidity display shows "LO" for humidity below 10% and "HI" for humidity above 90%. Setting the Alarm Time Use the + and ­ buttons (3) to set the alarm time. Pressing the + and ­ buttons (3) causes the alarm time to appear in place of the date on the display. · Holding down + or ­ changes the digits at high speed. BATTERY REPLACEMENT Press ­ to change the alarm time setting. °C/°F SET Press + to change the alarm time setting. Turning the Alarm On and Off Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze feature. Alarm Mode selector Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT button (1), the alarm sounds again five minutes later. · The indicator ON OFF flashes on the display to indicate that the snooze feature is activated. Replace batteries whenever the display of the clock becomes dim and difficult to read. Open the battery compartment cover as shown in the illustration. Make sure that their positive (+) and negative (­) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. Be sure to press the RESET button (6) after replacing batteries. Replace the battery compartment cover. Battery precautions · Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician immediately. [. . . ] · When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. · To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF. Stopping the Alarm USING THE LIGHT Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark. Important! · Overuse of the light can shorten battery life. THERMOMETER FUNCTIONS · A built-in sensor measures temperature and shows the measured value on the display. [. . . ]