User manual CASIO EXILIM EX-Z2000

[. . . ] E Digital Camera User's Guide Thank you for purchasing this CASIO product. · Before using it, be sure to read the precautions contained in this User's Guide. · Keep the User's Guide in a safe place for future reference. · For the most up-to-date information about this product, visit the official EXILIM Website at http://www. exilim. com/ To go to "Getting the Most Out of Dynamic Photo" click here! 1 Unpacking As you unpack your camera, check to make sure that all items shown below are included. [. . . ] To set up the camera before connecting to a printer 1. 3. Turn on the camera and press [MENU]. On the "Set Up" tab, select "USB" and then press [6]. Use [8] and [2] to select "PTP (PictBridge)", and then press [SET]. . Connecting the Camera to a Printer Use the USB cable that USB cable comes bundled with the camera to connect the Large connector camera to your printer's USB port. USB · The camera does not draw power over the USB port USB cable. Make sure the camera's battery is sufficiently charged before connecting. Small connector · Make sure that you insert USB/AV port the cable connector into the USB/AV port until you feel it click securely into place. Failure to Making sure that the 6 mark on the camera is aligned insert the connector fully with the 4 mark of the USB cable connector, connect the can result in poor cable to the camera. · Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration. · When connecting the USB cable to a USB port, make sure you align the connector correctly with the port. 115 Printing . 4. Turn on the printer and load paper. Turn on the camera. This will display the print menu screen. Use [8] and [2] to select "Paper Size", and then press [6]. Use [8] and [2] to select a paper size and then press [SET]. · The following are the available paper sizes. 3. 5"x5", 5"x7", 4"x6", A4, 8. 5"x11", By Printer · Selecting "By Printer" prints using a paper size selected on the printer. · See the documentation that comes with your printer for information about paper settings. 5. Use [8] and [2] to specify the print option you want. : Prints one image. Next, use [4] and [6] to select the image you want to print. With this option, images will be printed in accordance with DPOF settings (page 117). · To toggle date stamping on and off, press [BS]. The date stamp will be printed when "On" is indicated on the monitor screen. 1 Image 6. Use [8] and [2] to select "Print" and then press [SET]. Printing will start and the message "Busy. . . Please wait. . . " will appear on the monitor screen. [. . . ] Use [8] and [2] to select the subject type you want and then press [SET]. 10 Creating a Dynamic Photo Image CS speed Moving Subject 1sec (20fps) Moving Subject 2sec (10fps) 20 frames per second 10 frames per second Number of images 20 images 20 images Subject type Creates a moving subject from the CS images. · The subject is cropped out of each of the CS images. · "Moving Subject 1sec (20fps)" provides smooth subject movement, but recording time is limited to one second. · "Moving Subject 4sec (5fps)" provides more recording time, but subject movement is slightly rough. [. . . ]