User manual CASIO G-SHOCK

[. . . ] MO0911-EA Operation Guide 5081 Getting Acquainted Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to read this manual carefully. €¢ Button operations are indicated using the letters shown in the illustration. €¢ Each section of this manual provides you with the information you need to perform operations in each mode. [. . . ] OVER is indicated by the speed hand when the speed exceeds 1998. Lap Time D Start ➤ A Lap (Lap01) ( LAP displayed) ➤ A Lap (Lap02) ➤ D Stop ➤ A Reset Split Time D Start ➤ A Split ➤ A Split release ➤ D Stop ➤ A Reset ( SPL displayed) Countdown Timer L A Auto-repeat off Start time (Hours Minutes) Seconds Minutes) Auto-repeat on You can set the countdown timer start time within a range of one minute to 24 hours. An alarm sounds when the countdown reaches zero. €¢ You also can select auto-repeat, which automatically restarts the countdown from the original value you set whenever zero is reached. €¢ All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C. To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer. €¢ When the end of the countdown is reached, the alarm will sound for 10 seconds or until you stop it by pressing any button. €¢ The countdown time is reset to its starting value automatically after the alarm stops if auto-repeat is turned off. €¢ When auto-repeat is turned on, the countdown will restart automatically without pausing when it reaches zero. €¢ The countdown timer measurement operation continues even if you exit the Countdown Timer Mode. • Press D while a countdown operation is in progress to pause it. €¢ Alarm and Hourly Time Signal operations are performed in accordance with the current time in your Home City, as kept in the Timekeeping Mode. €¢ To stop the alarm tone after it starts to sound, press any button. €¢ Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen Displaying the SNZ setting screen • All of the operations in this section are performed in the World Time Mode, which you enter by pressing C. Snooze Alarm on alarm indicator indicator To view the current time in another time zone In the World Time Mode, use D to scroll through available city codes (time zones). Holding down the button scrolls at high speed. €¢ The lower left display shows the current time in the World Time City. €¢ Between the noon and midnight in the World Time Mode, a PM indicator (PM) appears above the hour digits in the lower left display. €¢ When the city code (time zone) you want is selected, you can press A to display the date. After about one second, the watch will resume regular timekeeping for the currently selected city. In the Alarm Mode, use D to select an alarm. [. . . ] In the range of 00 to 29, the seconds are reset to 00 without changing the minutes. €¢ The year can be set in the range of 2000 to 2099. €¢ The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except when battery has replaced. [. . . ]