User manual CASIO KL-7400

[. . . ] E KL-7400 User's Guide Be sure to read the Safety Precautions contained in this manual before trying to use the printer for the first time, and always keep this manual on hand for future reference. RJA520036-001V01 GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U. S. A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Use the start and end numbers to make sure that they are correct, and then press SET. Here we want to print one set of labels numbered 15, 16, and 17, so we will specify 3 for the number of labels to be printed. For the number of labels to be printed, you can specify a value in the range of 1 to 100. 25 E Creating and Printing a Tape Label with a Logo Your printer comes with 60 built-in logos that you can incorporate into your tape labels quickly and easily. 5. Use and to select the logo you want to use. appears on the right side of the display when the logo text runs off the right side of the display. Selecting a logo that has the indicator will cause the logo to scroll automatically in order to display all of the text. Use and to select the logo language you want and then press SET. The language you select here does not affect the display language setting. The design of the selected logo will scroll on the display. To pause scrolling at any point, press SET. The display will return automatically to the logo selection screen after logo scrolling is complete. To return to the logo selection screen while scrolling is in progress, press ESC. Important! You can incorporate built-in logos into tape labels that are printed using 12mm, 18mm or 24mm tape only. I To create and print a label with a logo 1. and to select NEW, and then press SET. 3. Use the cursor keys to select , and then press SET. You also could press LOGO in step 2 or 3 to enter the Logo Mode. 8. Use and to select the logo language you want and then press SET. The language you select here does not affect the display language setting. Example The following print contents change in accordance with the currently selected language. English Spanish German 4. Use and to select the group you want to use, and then press SET. For details, see "Built-in Logos" on page 59. French Italian Swedish 10. If you want to print a mirror image, press select MIRROR. and then use and to 11. Use E and to select PRINT, and then press SET. 26 13. [. . . ] The printer is being used in an area that is exposed to direct sunlight or some other source of bright light, causing malfunction of its optical sensor. Turn off the printer and then move it to a location that is not exposed to bright light. 49 40 -- NOT ENOUGH DIGITS! You are trying to print a bar code that does not have the required number of digits. If you do not want to delete the text, press ESC. 35 PENDING DATA WILL BE LOST CONTINUE?SET/ESC -- E 54 Message Cause and Action See page: 20 Message Cause and Action See page: 40 PRINT ERROR! [. . . ]