User manual CASIO KL-820

[. . . ] E KL-820 User's Guide RJA519067-001V01 Read This First! · CASIO COMPUTER CO. , LTD. shall not be held liable for any loss or claims by you or any other person or entity that may arise through the use of this printer. · Reproduction of this manual in any form, either in part or its entirety, is forbidden without the express permission of CASIO COMPUTER CO. , LTD. · The contents of the manual are subject to change without notice. [. . . ] The current font setting is indicated by the pointer along the left side of the display. · The font setting is applied to all of the characters within the block. You cannot make multiple specifications for specific characters. Selecting a Font Your printer gives you a choice of the following five fonts. · Sans-serif (SANS-SERIF) To change the default font setting 1. Press FUNC and then FORM (SET UP) to display the SET UP menu. Use x and z to select DEFAULT FONT and then press SET. Use x and z to select the font you want to use as the default, and then press SET. · The default font you specified will be used first for all new labels. When inputting text, you can use the procedure above to change the font to another style, if you want. · Sans-serif Italic (SANS-SERIF ITC) To change the font of text you have just input 1. After inputting the text you want, press FONT. Use x and z to select the font you want to change to and then press SET. · This will apply the setting and return to the text input screen. · Sans-serif Rounded (SANS-SERIF RND) E-17 Character Size There are two methods you can use to set the character size: AUTO and MANUAL. With AUTO, character size is set automatically in accordance with the tape size you are using and the number of lines you are printing. MANUAL lets you set the character size manually. The following table shows how AUTO decides which character size to use. Number of lines/tape size tape size number of lines 1 line 2 lines 3 lines 6mm 1×1 -- -- 9mm 2×2 -- -- 12mm 3×3 1×1 -- 18mm 4×4 1×1 1×1 24mm 4×4 1×1 1×1 Character Size Indicator 3×1 3×2 3×3 3×4 3×5 3×6 4×1 4×2 4×3 4×4 4×5 4×6 The following table shows the 24 characters sizes that are available with MANUAL size setting. Character Size Indicator 1×1 1×2 1×3 1×4 1×5 1×6 2×1 2×2 2×3 2×4 2×5 2×6 Actual Size (Vertical × Horizontal mm) 3mm × 3mm 3mm × 6mm 3mm × 9mm 3mm × 12mm 3mm × 15mm 3mm × 18mm 6mm × 3mm 6mm × 6mm 6mm × 9mm 6mm × 12mm 6mm × 15mm 6mm × 18mm Actual Size (Vertical × Horizontal mm) 9mm × 3mm 9mm × 6mm 9mm × 9mm 9mm × 12mm 9mm × 15mm 9mm × 18mm 12mm × 3mm 12mm × 6mm 12mm × 9mm 12mm × 12mm 12mm × 15mm 12mm × 18mm Character size changes are applied to printed text only. The size of the displayed text does not change. · The character size setting is applied to all of the characters within the block. You cannot make multiple specifications for specific characters. · The maximum character size you can print depends on the size of the tape you have loaded in the Label Printer and the number of lines of text you are printing. If the character size you specify is greater than the maximum characters size limit, the Label Printer automatically adjust your text vertically to fit as shown in the tables below. [. . . ] · The number of characters you are trying to input while using Layout Prinitng, Numbering or Bar Code exceeds the maximum number of allowable characters. · Use only one or two · You are attempting to block marks (B ) in a input more than two block marks (B ) into text. · A 6mm or 9mm tape · Turn off the printer and cartridge was loaded in replace the tape the printer while a 2-line cartridge with one that is or 2-block format is 12mm or wider. · You are trying to use the Bar code or Logo function while a 6mm or 9mm tape cartridge was loaded in the printer. · Turn off the printer and · A 6mm, 9mm or 12mm replace the tape tape cartridge was loaded cartridge with one that is in the printer while a 18mm or wider. [. . . ]