User manual CASIO QT-6000 VERSION 3.0

[. . . ] Congratulations on your selection of a CASIO QT-6000 touch screen smart terminal. this terminal is the product of the world's most advanced electronic technology , for outstanding versatility and reliability. Simplified operation is made possible by a specially designed touch screen and a wide selection of automated, programmable functions. A specially designed keyboard layout and a bright, easy-to-read color display help to take the fatigue out of long hours operation. [. . . ] The transaction must be finalized in the REG, REF or REG- mode using <CASH>, <CHARGE>, <CREDIT> or <CHECK>. After initialization, the terminal can issue only one post-finalization receipt per transaction. This key is used for "GUEST RECEIPT" key in check tracking operation. 00 Payment Cash Example 2 You can only use the following operation to re-input the number of customers when [ (customer number key) is preset to allow re-input. When programming prohibits re-input of the number of customers, this operation causes an error. You can re-input the number of customers either immediately after the initial input or during later registration. Example 3 You can use the following operation to add customers to an original number of customers input (when addition to the number of the customer is allowed). After initialization, the terminal does not print the number of customer on receipts. In Procedure 1, each clerk possesses a unique clerk interrupt buffer, and so the clerk interrupt function gives each individual clerk the ability to perform an independent registration operation. In this case, each clerk is individually linked to a unique clerk interrupt buffer. In Procedure 2, multiple clerks use the same clerk interrupt buffer, and so a single clerk interrupt operation (clerk change during registration) can perform any registration that is in progress. In this case, multiple clerks are linked to a single clerk interrupt buffer. The terminal must be programmed to allow use of the clerk interrupt function. In the REG, REF, and REG­ modes, clerks can be change while a transaction is in progress, making it possible for multiple clerks to simultaneously perform registrations using a single terminal. For example, if clerk 1 is interrupted while registering a transaction, clerk 2 can use the same machine to register a different transaction. Then clerk 1 can continue the original registration from the point where it was interrupted. A cancel operation can be performed during registration by either of the clerks. When clerk 1 signs back on (after being interrupt by clerk 2), the cancel operation cancels only the items registered after signing back on (only this receipt) or from the top of the transaction. A <NB> key must be programmed in order to use clerk interrupt. To perform batch printing on the slip printer, you must first connect the slip printer (SP-1300: option) and use the memory allocation operation (see program 5 mode in the programming manual) to reserve registration buffer memory. The capacity of the registration buffer memory is determined by the number of records of registration buffer memory reserved by the memory allocation operation. Print all items that are registered until the last slip printing. [. . . ] Employee who has done CLOCK-IN operation attempts to operate CLOCK-IN again. Employee who has not done BREAK-OUT operation attempts to operate BREAK-IN. Sign on after you clock-in or break out. Attempt is made to set a customer that already exists in the customer file. [. . . ]