User manual CASIO SF-R20

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Press B to specify the currently selected day of the week for highlighting. When a day of the week is specified for highlighting, its abbreviation appears highlighted (reverse field) on the display. To deselect (unhighlight) a day of the week, select it and press B. After specifying all of the days of the week you want highlighted during the period you specified in steps 2 through 4 above, press ENTER to highlight the applicable dates. To unhighlight days of the week for multiple months 1. Press CALN/SCHD to enter the Calendar Mode. Press FUNCTION once or twice to display the function menu. Press the applicable number key to select HOLIDAY CLEAR. To exit function menu without unhighlighting anything, press ESC. Perform steps 4 through 6 under "To highlight days of the week for multiple months" above to select the days of the week you want to unhighlight. Press ENTER to unhighlight the applicable dates. 39 E PART 3 Data Management Functions Using the Schedule Keeper The Schedule Keeper lets you store data about your appointments to keep you on time all the time. It lets you input the time and a description of your appointment. Whenever the prompt "ALARM?" is flashing on the display, input the schedule alarm time. Use the J and H cursor keys to move between the hour and minutes setting. Time data 1/NOV/2003 SAT WORK 08:00AM - 10:00AM ALARM: 07:45AM Schedule alarm time Whenever the schedule alarm setting is flashing on the display, press DEL to clear the alarm time and display the prompt "ALARM?". Input the alarm time using the same procedure described above. After inputting the data, press ENTER to store it into memory. If you attempt to set a schedule alarm time that is already set for another data entry, the message "ALARM TIME ALREADY USED OR PASSED!'' appears on the display. Then the data is stored without a schedule alarm. If you attempt to set a schedule alarm time that is already passed, the message "ALARM TIME ALREADY USED OR PASSED!'' appears on the display. Then the data is stored without a schedule alarm. E 42 Using the Schedule Keeper To set or change a schedule alarm for an existing data entry 1. Enter the Schedule Keeper and recall the data for which you want to set or change a schedule alarm. Press L until the cursor moves to the Schedule Alarm time. Use the H and J cursor keys to move between the hour and minutes setting. [. . . ] Press this key to delete the character at the current cursor position. Press this key to create a new line within a data entry. Press this key to highlight and unhighlight dates in the Calendar Mode. Press this key to start a search for data stored in memory. SHIFT CODE FUNCTION SPACE SYMBOL Shift key Code key Function key Space key Symbol key Enter key ENTER EDIT INS DEL Edit key Insert key Delete key Newline key B "` Search key 89 E PART 7 Technical Reference Key Cap J H K L 1 Name Cursor Right key Cursor Left key Cursor Up key Cursor Down key Numeric keys Function Press this key to move the cursor to the right. [. . . ]