User manual CASIO TC-1000

[. . . ] 2 Important Cordless Telephone Information . . . . . . 3 PAGE INITIAL SETUP Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Record an Outgoing Message . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Check your Outgoing Message . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The TC-1000 will automatically exit the autodial program mode. NOTE: If you do not press a key, the unit will exit the programming mode 7 seconds after the last command was entered. * TONE 0 OPER MEMORY # FLASH VOLUME CHANNEL REDIAL (PAUSE) HANDSET 22 PAGE REDIAL, FLASH & MIXED DIALING REDIAL PULSE/TONE MIXED DIALING If you live in a pulse or rotary dialing area, you can use TONE to access a long distance service (i. e. Sprint or MCI), bank by phone, or any other service that requires touchtone dialing from your cordless handset. Press TONE ( ) on the handset to change from pulse to tone mode temporarily when you are dialing. The TC-1000 remembers the last number you dialed. The redial memory will hold up to 15 digits. Every time you dial a new telephone number, the redial memory is updated with that new number. 1 2 Press TALK and wait for a dial tone. * TALK 1 2 3 4 Set the TONE/PULSE the base unit to Pulse. SWITCH at TONE PULSE Press REDIAL. REDIAL (PAUSE) Press TALK and wait for dial tone. Dial your local telephone number and wait for the line to connect. (You dialed your call in pulse mode. ) TALK FLASH If you subscribe to a call waiting service and you receive another call while using the phone, press FLASH to answer the second call. Press FLASH again to return to the first call. Press TONE ( on the keypad. ) NOTE: You do not have to change the TONE/PULSE SWITCH at the base unit. * FLASH may also be used on a business phone system (CENTREX, PBX) for transferring calls. * TONE Dial the tone numbers. NOTE: The "tone" mode can be canceled by pressing TALK or returning the handset to the base unit. FLASH N IF YOU DIALED A WRONG NUMBER HOLD HANDSET & BASE 21 You may place a call on hold while using the speakerphone or cordless handset. You will hear the TC-1000 play your outgoing message and your caller leave a message. SCREEN REMOTE 1 SAVE 2 ABC 5 JKL 8 TUV PAGE 3 DEF ERASE 3 4 To speak to the caller, press TALK. NOTE: DO NOT press ON/OFF on the base unit as you may disconnect your caller. 4 GHI 7 PRS REWIND 6MNO 9WXY FAST FWD TALK * TONE 0 OPER MEMORY # FLASH VOLUME To hang up, press TALK or return the handset to the base unit. The tape will automatically reset to answer new calls. CHANNEL REDIAL (PAUSE) HANDSET 16 PLAYING MESSAGES & PAGE REWIND SAVE MESSAGES 1 Press REWIND ( key) during playback. Each time REWIND ( key) is pressed, the tape will rewind for several seconds. * * Messages will be saved within 7 seconds after you hear the last message. The TC-1000 will automatically reset to answer new calls, after saving messages. REWIND * TONE 1 Press SAVE (4 on the keypad. ) SAVE FAST FORWARD 4 GHI I will save messages. ERASE Messages may be erased within 7 seconds after hearing the last message. 1 Press FAST FWD (# key) to move quickly through messages. Each time FAST FWD (# key) is pressed, the tape will fast forward for several seconds. FAST FWD 1 Press ERASE (6 on the keypad. ) ERASE I will erase messages. 6MNO # REPLAY ALL MESSAGES 1 Press PLAY (3 on the keypad) after the last message is played. PLAY AUTOMATIC ERASE (Tape Reset) The TC-1000 is designed to automatically record new messages over old ones. To automatically erase messages, DO NOT press SAVE (key 4) during message playback or within 7 seconds after the last message is heard. 3 DEF HANDSET YING MESSAGES 15 PAGE HANDSET VOLUME CONTROL Press VOLUME to change the volume level of the handset. Press VOLUME up to four times to increase the sound level. Press VOLUME a fifth time and the sound level returns to normal. VOLUME HOLD SCREEN REMOTE TALK LO BATT MEMO CONV MESSAGE PLAY RETRIEVE MESSAGES FROM HANDSET You can play messages through the handset. Make sure the handset is in the Standby mode and the base unit is "on. " 1 SAVE 2 ABC 5 JKL 8 TUV PAGE 3 DEF ERASE 4 GHI 7 PRS REWIND 6MNO 9WXY FAST FWD 1 2 3 Press SCREEN/REMOTE. You will hear a confirmation tone. SCREEN REMOTE * TONE 0 OPER MEMORY # FLASH VOLUME CHANNEL REDIAL (PAUSE) Press PLAY (3 on the keypad) to play your messages. [. . . ] 30 Multi-Line Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Cleaning the Base Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Cleaning the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Removing/Replacing Microcassette . . . . . . . . . . . . . . . [. . . ]