User manual CASIO TSQ-1200

[. . . ] MA0310-EA Operation Guide TSQ-1200 SETTING THE TIME 1. Remove the batteries to stop the Second hand (3) at 12 o'clock position. [. . . ] 8 · Note that this clock does not distinguish between AM and PM times. If you set an alarm to wake up to in the morning, the alarm will sound again at the same time in the evening if you leave the Alarm ON/OFF switch (8) 8 raised. Stopping the Alarm To stop the alarm after it starts to sound, press the Alarm ON/OFF switch (8). 8 About the alarm sound This clock lets you select either a standard beeper tone or bird calls as the alarm sound. When you select birdcalls, an alarm operation produces one of 7 different birdcalls, changing automatically to a different one with each alarm operation. The alarm sounds for about 90 seconds or until you stop it. When bird call is selected with the Tone selector (5), 5 the first 40 seconds uses a bird call, while the final 50 seconds the alarm sound is an electronic beeper. BATTERY REPLACEMENT Low battery power is indicated when timekeeping slows or stops completely. Should either of these symptoms occur, replace the batteries immediately. Do not leave low or dead batteries in the clock. Open the Back cover (9) as shown in the illustration. Make sure that their positive (+) and negative (­) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. Be sure to press the RESET button (;) after replacing batteries. 9 · A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the clock. [. . . ] · Replace the batteries at least once a year, even if the current batteries are working properly. · The batteries that come with the clock lose some of their power during transport and storage. 1 [. . . ]