User manual CASIO WK-1630

[. . . ] 8 Sound Source Instrument Part Sub-block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MIDI Send by Auto-accompaniment, Song Memory, and the SMF Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Product Configuration as a MIDI Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 3 4 Conditions that Disable Message Send and Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The width of the change depends on the setting of the Transpose/Function's Bend Range parameter and the Pitch Bend Sensitivity, whose setting is configured by RPN. Part III System Message 15 Format Message Format: FEH Send This message is never sent. Receive When this message is received once, the Active Sensing mode is entered. If no MIDI Message is received for a particular amount of time, voices being sounded by this Model's sound source are released, controller is reset, and Active Sensing mode is exited. Active Sensing 25 16 Format System Exclusive Message Message Format: F0H. . . . F7H This Model can send and receive Universal System Exclusive Messages, as well as System Exclusive Messages that have a format that is unique to this Model. 16. 1 Format Universal Realtime System Exclusive Message 7FH. . . . F7H Message Format: F0H 16. 1. 1 Format Master Volume Message Format: F0H 7FH 7FH 04H 01H llH mmH F7H ll: Value LSB (Note 1) mm: Value MSB (Note 1) Note 1: The setting value matches the value that is sent and received. Receive Receipt changes the Master Volume parameter. Note that the Master Volume parameter cannot be changed with an operation of this Model. 16. 1. 2 Format Master Balance Message Format: F0H 7FH 7FH 04H 02H llH mmH F7H ll: Value LSB (Note 1) mm: Value MSB (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43. 6 Pan Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Master Pan parameter. Note that the Master Pan parameter cannot be changed with an operation of this Model. 26 16. 1. 3 Format Master Fine Tuning Message Format: F0H 7FH 7FH 04H 03H 00H mmH F7H mm: Value MSB(Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43. 7 -99 to 0 to 99 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent when the Fine Tune parameter of Transpose/Function is changed. Receive Receipt changes the Fine Tune parameter. Acoustic Resonance Operations (PX-410R/PX-575R) When Acoustic Resonance used by piano tones is selected, the Fine Tune of the piano string for which resonance is simulated is also changed in accordance with the Master Fine Tune value that is set. Because of this, receipt of this message may cause the resonance interval to change temporarily. 16. 1. 4 Format Master Coarse Tuning Message Format: F0H 7FH 7FH 04H 04H llH mmH F7H ll: Value LSB (Note 1) mm: Value MSB (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43. 4 -24 to 0 to 24 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Though this Model does not support GM2, receipt of the GM2 System On message has the same result as receipt of the GM System On message. 16. 1. 8 GS Message Message Format: F0H 41H 10H 42H 12H 40H 00H 7FH 00H 41H F7H Send This message is never sent. Receive Receipt performs the same operation as when the GM System On message is received. 16. 2 Format This Model's System Exclusive Message Message Format: F0H 44H 12H 02H. . . . F7H These messages can control most of the this Model's parameters, as well as user data send/receive with Flash memory and come commands. For more information, see "Part IV This Model's System Exclusive Messages". 30 Part IV This Model's System Exclusive Messages 17 17. 1 Format Message Classifications This Model's SysEx operations are classified as Parameter type for send and receive of an individual Parameter, and Parameter Set type for Bulk send and receive of a set of parameters. These SysEx types can be further broken down into parameter categories according to the item being transferred. This Model's System Exclusive Messages Individual Parameter Transfer Command Patch Status and Commands Common MIDI Tune/Mix Sys Chorus Sys Reverb Master EQ DSP Basic Tune/Mix Tone Drawbar Vibrato Part Wave Data Information Song Data Information Rhythm Data Information SMF Data Information Parameter Set Bulk Transfer User Tone User Timbre User Drum User Instrument User Wave Parameter User Wave Data User DSP Song User Rhythm Pattern Registration User Drawbar SMF The operation classification of a message is determined in accordance with the value of the "Action" field of this Model's SysEx message. The basic format for all operation type messages is described in "17. 2 Message Structure", below. 31 17. 2 Message Structures This Model's System Exclusive Messages is formed of the 13 fields shown below. Whether or not a particular field is included in a message and the length of each field depends on the message. The minimum unit for the length of each field is bytes. If two values are contained within the same byte, they are separated by a slash (/). 1 SYSEX 2 MAN 3 MOD 4 dev 5 act 6 cat 7 prm 8 ilen/dlen 9 ps 10 index 11 data 12 sum 13 EOX The "act" field describes the action that the message performs. The meanings of the "index" and "data" fields differ according to the content of the act field. [. . . ] The 4 Mbytes of flash memory of this Model is made up of two blocks, so two Parameter Sets are used. System Exclusive Format Field 01 02 03 04 05 06 07 08 09 10 11 12 13 SYSEX MAN MOD dev act cat prm ps index data sum EOX Value F0 44 11, 02 00 to 1F, or 7F 04(HDS), 05(HDR), 07(Control) Flash Memory Image = 11 00 Indicates the Flash Image Block Number being transferred. For details, see "40 About Parameter Set (PS) numbers". See "IV This Model's System Exclusive Message". [. . . ]