User manual CASIO WK-200

[. . . ] ES USER'S GUIDE Please keep all information for future reference. Safety Precautions Before trying to use the keyboard, be sure to read the separate "Safety Precautions". Español GUÍA DEL USUARIO Guarde toda la información para futuras consultas. Precauciones de seguridad Antes de intentar usar el teclado, asegúrese de leer las "Precauciones de seguridad" separadas. WK200/500ES1B English NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] · If you press bk while an intro pattern is being played, the variation pattern will start when the intro pattern is finished. Lights Auto Accompaniment Ending Use the following procedure to play an ending of a few measures. 1. While an Auto Accompaniment is playing, press bl. This will play the ending pattern and then stop Auto Accompaniment play automatically. Lights E-39 English Using Auto Accompaniment Effectively Auto Accompaniment Fill-in Use the procedure below to play a fill-in pattern during a performance. · A "fill-in" is a short phrase played where you want to change the mood of a piece. A fill-in pattern can be used to create a link between two melodies or an accent. · Normal and variation patterns have their own unique fill-in patterns. Using Auto Accompaniment Using Synchro Start Use the following procedure to configure the Digital Keyboard to start Auto Accompaniment play as soon as you press a keyboard key. Adjusting the Accompaniment Volume Use the following procedure to adjust the balance between what you are playing on the keyboard and the volume of the Auto Accompaniment. 1. Press bl. This enters accompaniment start standby. Flashes 1. Press ct and then use the bs (10-key) [4] ( and [6] ( E-6). ) ) keys to display "AcompVol" (page A c ompVo l 2. Use the bs (10-key) [­] and [+] keys to adjust the 2. Play a chord on the keyboard. This will start full part accompaniment (normal). Any of the following operations can be performed while in synchro standby to start a non-normal pattern. · To start with intro pattern, press 8. · To start with variation pattern play, press bk. accompaniment volume. Using One-Touch Preset With One-Touch Preset, the Digital Keyboard automatically configures optimal tone, tempo, and other settings in accordance with the rhythm pattern you select. Changing Auto Accompaniment Speed (Tempo) Use the following procedure to change Auto Accompaniment speed to a level that suits you. 1. Hold down bq until the current tone screen appears on the display. This will automatically apply the One-Touch Preset settings in accordance with the rhythm pattern that is currently selected. 1. Press bo. Use y (slower) and t (faster) to change the tempo setting. Holding down either button changes the setting at high speed. · Pressing y and t at the same time will initialize the tempo setting in accordance with the currently selected rhythm. · While the tempo value is flashing, you also can use bs (10-key) to change it. · If you do not perform any operation for a few seconds after the tempo setting screen appears, the display will return to the screen displayed before you pressed bo. 2. Play a chord on the keyboard. This will start accompaniment automatically. Flashes E-40 Using Auto Accompaniment Using Auto Harmonize Auto Harmonize automatically adds harmony to notes you play with your right hand, which adds rich depth to the melody of your performances. You can select from among 12 types of Auto Harmonize to suit the type of music you are playing. Type number 001 Type Name Duet 1 Description Adds close (separated by 2 to 4 degrees) 1-note harmony below the melody note. Adds open (separated by more than 4 to 6 degrees) 1-note harmony below the melody note. Adds the note from the next lower octave. [. . . ] Unprotect one or more of the sampled sounds, which will allow it to be overwritten or deleted. · Save the new file to a different card or use another name. · Remove the read-only attribute of the exiting file on the SD memory card and try again. · Use a different SD memory card. [. . . ]