User manual CASIO WK-500

[. . . ] CTK-4000/CTK-5000/LK-270/LK-205/WK-200/WK-500/CDP-200R MIDI Implementation CASIO COMPUTER CO. , LTD. Contents Part I 1 1. 1 1. 2 1. 3 MIDI Message Overview System Section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Performance Controller Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sound Generator Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. 3. 1 Sound Generator Common Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Receive This message is not received by this Instrument. 16 Format Stop Message Format: FCH Send Sent when auto accompaniment is used. Receive This message is not received by this Instrument. 17 Format Active Sensing Message Format: FEH Send This message is never sent. 19 Receive Once this message is received, the Active Sensing mode is entered. If no MIDI message is received for a specified amount of time, voices being sounded by the Instrument's sound source are released, the controller is reset, and the Active Sensing mode is exited. 18 Format System Exclusive Message Message Format: F0H. . . . F7H The Instrument sends and receives standard universal system exclusive messages, and system exclusive messages that have Instrument-specific formats. 18. 1 Format Universal Realtime System Exclusive Message Message Format: F0H 7FH. . . . F7H 18. 1. 1 Format Master Volume Message Format: F0H 7FH 7FH 04H 01H llH mmH F7H ll: LSB Value mm: MSB Value Send This message is never sent. Receive Receipt changes the Master Volume parameter. Note that the Master Volume parameter cannot be changed with an Instrument operation. 18. 1. 2 Format Master Fine Tuning Message Format: F0H 7FH 7FH 04H 03H llH mmH F7H mm: MSB Value(Note1) Note 1: For information about the relationship between setting values and send/receive values, see "33. 4 -100 - 0 - +99 Setting Value Table" in "Part VII Setting Values and Send/Receive Values" of this document. Send This message is sent when the tuning setting is changed. Receive Receipt changes the tuning setting. 20 18. 1. 3 Format Master Coarse Tuning Message Format: F0H 7FH 7FH 04H 04H 00H mmH F7H ll: LSB Value mm: MSB Value Send Sent when Transpose is changed. Receive Receipt changes the Transpose parameter. Does not affect sound source operation when the Timbre Type is Drum. 18. 1. 4 Format Reverb Parameter Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H ppH vvH F7H pp: Parameter vv: Value Time Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H 01H vvH F7H vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see "33. 5 Reverb Time Setting Value Table" in "Part VII Setting Values and Send/Receive Values" of this document. Send Sent when the Reverb duration is changed. Receive Receipt changes the Reverb duration. 18. 1. 5 Format Chorus Parameter Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H ppH vvH F7H pp: Parameter vv: Value Type Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 00H vvH F7H vv: Value (Note1) 21 Note 1: For information about the relationship between setting values and send/receive values, see "33. 6 Chorus Type Setting Value Table" in "Part VII Setting Values and Send/Receive Values". Send This message is sent when the System Chorus Type setting is changed. Receive Receipt changes the System Chorus Type parameter. Rate Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 01H vvH F7H vv: Value (Note1) Note 1: The setting value matches the value that is sent and received. Receive Receipt changes the System Chorus Rate parameter. 18. 1. 6 GM System Message GM System On Format Message Format: F0H 7EH 7FH 09H 01H F7H Send This message is never sent. Receive Receipt puts the sound source into a GM sound source mode. GM System Off Format Message Format: F0H 7EH 7FH 09H 02H F7H Send This message is never sent. Receive Receipt changes the sound source setting to the Instrument presetting. GM2 System On Format Message Format: F0H 7EH 7FH 09H 03H F7H Send This message is never sent. Receive Though the Instrument does not support GM2, receipt of the GM2 System On message has the same result as receipt of the GM System On message. 22 18. 1. 7 GS Message Note: dd (Device ID) is ignored. Message Format: F0H 41H ddH 42H 12H 40H 00H 7FH 00H 41H F7H Send This message is never sent. Receive Receipt performs the same operation as when the GM System On message is received. 18. 2 Format Instrument-Specific System Exclusive Message Message Format: F0H 44H 16H 01H. . . . F7H This message can be used to send the Instrument memory status, for two-way transfer of special operation commands and user data, to perform sound source parameter operations, etc. For more information, see "Part IV Instrument-Specific System Exclusive Messages". 23 Part IV Instrument-Specific System Exclusive Messages 19 Format This section explains the format of the Instrument-specific System Exclusive Messages. See "Part V Parameter List" and "Part VI Parameter Set List" for information about how parameter sets actually are transferred. 19. 1 Message Classifications Basically, the operation that corresponds to Instrument-specific system exclusive messages is parameter data transfer. The following operations can be performed from an external device using this parameter transfer message. · · · · Modification of an individual Instrument parameter Batch modification of a particular Instrument parameter set Import of an individual Instrument parameter value Batch import of a particular Instrument parameter set In addition to parameters being used as device setting values, some parameters act as commands when received by the Instrument and as device status information when sent from the Instrument. [. . . ] Ps Category Ps Memory 0006 W 7 01 00-00-7F Ps Number 0007 W 14 01 0000-0001-3FFF Ps Data Type 0008 R 8 01 00-00-FF Current Ps Existence 0009 R 1 01 00-00-01 Current Ps Protect 000A R 1 01 00-00-01 Current Ps Size 000B R 32 01 00000000-00000000-FFFFFFFF Size of a parameter set in the specified category/ number (bytes). 00000000-00000000-FFFFFFFF Total size of a parameter sets under the specified category (bytes). 00-20-7F Name of a parameter set in the specified category (ASCII characters). Current Sub Ps Size 000C R 32 01 Current Ps Name 000D R 8 08 Max Ps Size 000E R 32 01 00000000-00000000-FFFFFFFF Maximum size of parameter sets in the specified category (bytes). 0000-0000-FFFF Maximum number parameter sets in the specified category (bytes). Max Ps Number 000F R 14 01 Current Free Size 0010 R 32 01 00000000-00000000-FFFFFFFF Size of current parameter set free space in the specified category (bytes). [. . . ]