User manual CASIO XJ-350

[. . . ] E DATA PROJECTOR XJ-350 User's Guide Keep this manual in a safe place for future reference. · · · · Digital Light ProcessingTM, DLPTM, Digital Micromirror DeviceTM, and DMDTM are trademarks of Texas Instruments Incorporated of the United States. Microsoft, Windows, Windows NT, Windows XP, and the Windows logo are registered trademarks or trademarks of Microsoft Corporation of the United States in the United States and other countries. Apple and Macintosh are registered trademarks of Apple Computer, Inc. Other company and product names may be registered trademarks or trademarks of their respective owners. VCCI B Safety Precautions Thank you for selecting this CASIO product. [. . . ] On the remote controller, press the [D-ZOOM +] key to enlarge the image. You can press the [D-ZOOM +] key again to further enlarge the image, up to 4 times. You can back step through the image enlargements by pressing the [D-ZOOM ­] key. You can shift the zoomed image up, down, left, or right by pressing the applicable remote controller cursor key. 4. To exit image enlargement and return the image to its original size, press the remote controller's [ESC] key. 55 Projection Operations Using Picture-in-Picture (P-IN-P) While RGB is selected as the input source, you can display a sub-window that simultaneously displays the image being input through the VIDEO or S-VIDEO terminal. This function is called "picture-in-picture" or "P-IN-P". RGB input image VIDEO (or S-VIDEO) input image The initial default setting for the sub-window input source is VIDEO. Use the setup menu when you want to change the sub-window input source to S-VIDEO. For details, see "Input Settings P-in-P Input" on page 87. Note that P-IN-P can be used only when RGB is selected as the input source. It is not available while any other input source is selected. If Component is selected for "Input Settings RGB Input" on the setup menu, you need to change the setting to RGB in order to use picture-in-picture. Note that the initial default setting for "Input Settings RGB Input" is RGB. 56 Projection Operations To display the sub-window 1. On the remote controller, press the [RGB/COMPONENT] key to select RGB as the input source. You can also select the input source using the projector's [INPUT] key. the remote controller, press the [P-IN-P] key to display the subwindow. This causes the sub-window, containing the image input through the VIDEO or S-VIDEO terminal, to appear on the projected image. The sub-window will be located at the position that was used the last time a sub-window was displayed. The initial default location is the lower right corner. You can leave the sub-window where it is, or move it to another location within the projected image. See "To change the location of the sub-window" for more information. You can also select one of three sizes for the sub-window. See "To change the size of the sub-window" for more information. 3. To close the sub-window, press the remote controller's [P-IN-P] key or the [ESC] key. To change the location of the sub-window While a sub-window is displayed, use the remote controller's cursor keys to move it to one of the nine locations shown below. 57 Projection Operations To change the size of the sub-window While a sub-window is displayed, use the [D-ZOOM +] and [D-ZOOM ­] keys to select one of the three available sub-window sizes (small, medium, large). [D-ZOOM +] key Large Medium Small [D-ZOOM ­] key When RGB is selected as the input source, certain signal types (1600 × 1200 UXGA signal, for example) do not support selection of the large sub-window size. Muting the Image and Audio (MUTE) The mute function causes the projected image to go to black screen, and stop output of the audio from the speaker. To mute the image and audio 1. To the remote controller, press the [MUTE] key. This causes the projected image to go to a black screen, and stops output from the speaker. restore the image and audio, press the [MUTE] key again or press the [ESC] key. You can select a black screen, blue screen, or a logo screen for the mute function. For details, see "Screen Settings Mute Screen" on page 83. 58 Projection Operations Freezing the Projected Image (FREEZE) The freeze function stores the current projected image in projector memory, and projects it as a still image. To freeze the projected image 1. To the remote controller, press the [FREEZE] key. This freezes the image that was being projected when you pressed the [FREEZE] key. unfreeze the image, press the [FREEZE] key again or press the [ESC] key. Operating the Computer with the Remote Controller (Wireless Mouse) You can use the remote controller as a wireless mouse to perform mouse operations on the computer that is connected to the projector. [. . . ] The remote controller batteries may be dead. The remote controller may be too far from the projector. Make sure the remote controller is within the allowable range when you operate it. 36 When RGB/Component is selected as the input source, the color of the projected image or the image itself is abnormal. 85 The projector keys to not work. The remote controller does not work. 91 25 27 The TEMP or LAMP indicator is flashing or lit. [. . . ]