User manual CASIO XJ-450

[. . . ] E DATA PROJECTOR XJ-450 User's Guide Keep this manual in a safe place for future reference. · · · · Digital Light ProcessingTM, DLPTM, Digital Micromirror DeviceTM, and DMDTM are trademarks of Texas Instruments Incorporated of the United States. Microsoft, Windows, Windows NT, Windows XP, and the Windows logo are registered trademarks or trademarks of Microsoft Corporation of the United States in the United States and other countries. Apple and Macintosh are registered trademarks of Apple Computer, Inc. Other company and product names may be registered trademarks or trademarks of their respective owners. VCCI B Safety Precautions Safety Precautions Thank you for selecting this CASIO product. [. . . ] Use the setup menu when you want to change the sub-window input source to S-VIDEO. For details, see "Input Settings P-in-P Input" on page 90. Note that P-IN-P can be used only when RGB is selected as the input source. It is not available while any other input source is selected. If Component is selected for "Input Settings RGB Input" on the setup menu, you need to change the setting to RGB in order to use picture-in-picture. Note that the initial default setting for "Input Settings RGB Input" is RGB. 59 Projection Operations To display the sub-window 1. On the remote controller, press the [RGB] key to select RGB as the input source. You can also select the input source using the projector's [INPUT] key. the remote controller, press the [P-IN-P] key to display the subwindow. This causes the sub-window, containing the image input through the VIDEO or S-VIDEO terminal, to appear on the projected image. The sub-window will be located at the position that was used the last time a sub-window was displayed. The initial default location is the lower right corner. You can leave the sub-window where it is, or move it to another location within the projected image. See "To change the location of the sub-window" for more information. You can also select one of three sizes for the sub-window. See "To change the size of the sub-window" for more information. 3. To close the sub-window, press the remote controller's [P-IN-P] key or the [ESC] key. To change the location of the sub-window While a sub-window is displayed, use the remote controller's cursor keys to move it to one of the nine locations shown below. 60 Projection Operations To change the size of the sub-window While a sub-window is displayed, use the [D-ZOOM +] and [D-ZOOM ­] keys to select one of the three available sub-window sizes (small, medium, large). [D-ZOOM +] key Large Medium Small [D-ZOOM ­] key When RGB is selected as the input source, certain signal types (1600 × 1200 UXGA signal, for example) do not support selection of the large sub-window size. Muting the Image and Audio (MUTE) The mute function causes the projected image to go to black screen, and stop output of the audio from the speaker. To mute the image and audio 1. To the remote controller, press the [MUTE] key. This causes the projected image to go to a black screen, and stops output from the speaker. restore the image and audio, press the [MUTE] key again or press the [ESC] key. You can select a black screen, blue screen, or a logo screen for the mute function. For details, see "Screen Settings Mute Screen" on page 88. 61 Projection Operations Freezing the Projected Image (FREEZE) The freeze function stores the current projected image in projector memory, and projects it as a still image. To freeze the projected image 1. To the remote controller, press the [FREEZE] key. This freezes the image that was being projected when you pressed the [FREEZE] key. unfreeze the image, press the [FREEZE] key again or press the [ESC] key. Operating the Computer with the Remote Controller (Wireless Mouse) You can use the remote controller as a wireless mouse to perform mouse operations on the computer that is connected to the projector. Wireless mouse capabilities really come in handy when you need to open a presentation software file for projection during a meeting or presentation. To use the remote controller as a wireless mouse, the computer must be connected to the projector by the USB cable that comes with the projector. For details, see "Connecting a Computer to the Projector's USB Port" on page 38. Note that wireless mouse capabilities are available only when RGB is selected as the input source and there is RGB input from the computer to the projector. To operate the computer with the remote controller 1. Use the mini D-Sub cable and USB cable that come with the projector to connect the computer to the projector. After that, turn on the projector and the computer. See the following for more information. [. . . ] The remote controller does not work. 94 27 29 The auto keystone correction function (AF/AK) does not work correctly. The sensors may have finger smudges or dirt on them. Carefully wipe the sensors with a commercially available lens cloth or optical lens paper, like those for eyeglasses or camera lenses. There may be an obstruction between the sensors and the screen. Remove the obstruction. 111 _ The TEMP or LAMP indicator is flashing or lit. [. . . ]