User manual CASIO XJ-S35

[. . . ] E DATA PROJECTOR XJ-S30/XJ-S35 User's Guide Be sure to read the precautions in the separate User's Guide (Basic Operation). For details about setting up the projector and lamp replacement, see the User's Guide (Basic Operation). Be sure to keep all user documentation handy for future reference. · DLP is a registered trademark of Texas Instruments of the United States. · Microsoft, Windows, Windows NT, Windows XP, and the Windows logo are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. [. . . ] A larger value produces a stronger contrast. Use this sub-menu to adjust the sharpness of the outlines in the projected image. A larger value makes the image sharper, while a smaller value makes it softer. Use this sub-menu to adjust the color saturation of the projected image. A larger value increases color saturation. Use this sub-menu to adjust the tint of the projected image. A larger value makes the overall image more bluish, while a smaller value makes the overall image more reddish. This setting is supported only when the signal is NTSC or NTSC4. 43. You can select from among five different color mode settings to optimize the projected image in accordance with image contents and projection conditions. Presentation*: Use this setting for standard presentations in a well-lit area. This is the initial default setting when the input source is either RGB or USB. Standard: Use this setting when you want to highlight the colors of your presentation. Graphics: Use this setting when you want photographs and graphics to appear natural. Theater*: Use this setting to bring out the dark portions of your images. This is the initial default setting when the input source is either component video or video. Blackboard: Use this setting for easy viewing when projecting onto a blackboard. This sub-menu lets you adjust the color balance of the projected image. Color balance lets you select either "Color Temperature" or "Color" (for individual adjustment of red, green and blue) as the adjustment method. Color Temperature: Select this option when you want to adjust the color temperature. Selecting "LO" gives whites a reddish cast, while "HI" gives them a bluish cast. Selecting "NORM*" sets a medium setting between the two colors. Color: Select this option when you want to individually adjust the intensity of red, green, and blue. [. . . ] It shows the number of vertical pixels of resolution of the RGB input signal. This sub-menu item shows the horizontal frequency of the input signal. This sub-menu item shows the vertical frequency of the input signal. This sub-menu item appears only when RGB or component is the input signal, and shows the scanning frequency of the input signal. [. . . ]