User manual CAT EYE CC-VL800 VELO 5 VELO 8

[. . . ] They must be disposed in accordance with local regulations. · Do not leave the main unit exposed to direct sunlight. · For cleaning of the main unit or accessories, use diluted neutral detergent on a soft cloth, and then wipe it off with a dry cloth. [. . . ] Data Reset When a screen with the Reset mark in the OPERATION FLOW is displayed, continue pressing the MODE button and the measured data will return to zero. However, the Odometer (total distance) and Clock do not return to zero. How to Set Clock In the clock mode, press SET button on the back, and the display enters clock setting mode. *If Km/h has been selected for speed scale, it becomes 24-hour clock. If mph has been selected, it becomes 12-hour clock. f How to Change Tire Size Display the Total Distance (Odo) and press the SET button to change the tire size. You can select a tire size in two ways: Either select from among preset sizes c or enter the tire's circumference directly in increments of 1 cm. d Maintenance · If the contact of the unit or the bracket gets wet, dry it off with a cloth. If they become rusty, it will cause speed detection error. · If the gaps between the buttons and the unit get clogged with mud or sand, wash them away with water. Has the battery in the main unit run down?Current speed does not appear. (First, short-circuit the contact of the main unit a few times with a piece of metal. If current speed appears, the main unit is working fine and the cause should be attributed to the bracket or the sensor. ) Is the clearance between the sensor and the magnet too large?Are the magnet's center and the sensor's marking line aligned? [. . . ] The service must be performed by Cat Eye Co. , Ltd. To return the product, pack it carefully and remember to enclose the warranty certificate with instruction for repair. Please write or type your name and address clearly on the warranty certificate. [. . . ]