User manual CAT EYE E-TRAIN DATA

[. . . ] Instruction Manual for Windows 2000 ver. 2 English Edition 2. 0e for Windows 95/98/2000 INTRODUCTION Thank you very much for purchasing the Cat Eye MSC Download Kit. MSC Download Kit contains the software "e-Train Data" and the interface unit that connects the Cat Eye MSC heart rate computers to your PC. The data stored in your MSC heart rate computer is downloaded to your PC through e-Train Data. You can further arrange it on the screen in graphical format. [. . . ] When heart rate target zone data is superimposed over the graph, the zone stay time and its ratio for each zone also appears in the information panel 1. Maximum/minimum/average figure of the zoomed area Laterally-zoomed graph In order to zoom the graph, you must designate the range that has more than two data points. If the range has only one data point, the alert message appears. e-Train DataTM 19 Reducing graph 1. Click [Reduce] button in the toolbar. The zoomed graph is restored to its previous state. (Or choose [Edit-] ­ [Reduce] from the menu bar; or choose [Reduce] from the pop-up menu. ) Reference: This operation restores the graph to its previous state. To return the graph to its original state, you should do the reducing operation the same number of times as the zooming oepration. 20 e-Train DataTM Changing horizontal axis 1. Click [Change The Horizontal Axis] button in the toolbar. (Or choose [Edit] ­ [Change The Horizontal Axis] from the menu bar. ) The horizontal axis changes from Time to Distance. Distance 2. Click [Change The Horizontal Axis] button in the toolbar again. It changes from Distance to Time. Time Changing calibration in horizontal axis The setting of the horizontal axis can be changed. With a right-click on the graph area, the pop-up menu appears. Enter the calibration's interval and the gauge's starting point. To clear the calibration, uncheck the check-box. Click [OK]. e-Train DataTM 21 Smoothing graph The graph line tends to be more jagged if the data covers a longer period of elapsed time. In order to make it a more easy-to-read graph, there are five smoothing levels. (Or choose [Edit] ­ [Smooth] from the menu bar. ) To choose the smoothing level, right-click the button. right-click Level 3 Level 5 2. Click the [Smooth] button again and the graph returns to the original state. 22 e-Train DataTM Superimposing heart rate target zone data You can superimpose heart rate target zone data over memory record data. Click [Open Training Zone File over the graph] in the tool bar. (Or choose [File] ­ [Superimpose] ­ [Training Zone] from the menu bar. ) A dialogue box appears. 2. Choose the sample file [sample1z. csv] and click [Open]. Zone currently shown on the graph H. R. target data target zone 1 The target zone 1 appears on the graph. Reference: More than two zones can be chosen. Choose the desired zones from the pop-up menu. [. . . ] After downloading starts, an alert message appears. Or once downloading starts, it never completes. Are the contacts of the MSC-unit or interface unit dirty?The contacts of the MSC-unit and interface unit might not be in a proper engagement. [. . . ]