User manual CATERPILLAR 953D WH BROCHURE

[. . . ] 953D WHLoader Waste Handler Track Engine Flywheel Power Engine Model Buckets Capacity ­ GP Landfill Capacity ­ MP Landfill 110 kW 148 hp Cat® C6. 6 ACERTTM 2. 3 m3 2. 1 m3 3 yd3 2. 74 yd3 953D WH Features Unmatched Versatility The 953D Waste Handler is the all-purpose machine for small landfills and demolition sites. Your track loader will be able to · Excavate and stockpile to build new cells · Keep the discharge area clear · Load and tow trucks · Sort out recyclables and spread trash · Excavate, carry and spread soil cover material · Compact top layer before daily cover is applied Improved Serviceability Radiator guard and hydraulic fan door are hinged to provide a quick and easy access for cleaning and servicing. [. . . ] This is the best choice in landfill. Striker Bars Very useful in landfills, the striker bars removes waste from the tracks to prevent damaging the fenders and the cab. Equipped with a step, it facilitate the access to the cab from the rear. General Purpose Bucket ­ Landfill This trash rack increases the standard bucket capacity to move low density materials. Multi-Purpose Bucket ­ Landfill This buckets provides the ability to load, push, grab. Trash rack increases the standard MP bucket capacity to move low density materials. Guard, Cab Lights and Windshield Screen Provides additional protection to the windshield and the lights against debris. Guard Track Roller Provides additional protection for rollers and reduce debris entry inside the links. Tilt Cab System The D-Series enables the cab to tilt up to 90°. The optional hydraulic jack provides a 30° tilting capability recommended for an easy servicing in the field. Fast Fill System Special port and vent designed to minimize the fuel tank refill time and increase productivity. 4 953D Waste Handler Specifications Engine Flywheel Power Engine Model 110 kW 148 hp ® Cat C6. 6 ACERTTM Buckets Capacity ­ GP Landfill Capacity ­ MP Landfill Width ­ GP Landfill Width ­ MP Landfill 2. 3 m3 2. 1 m3 2458 mm 2536 mm 3 yd3 2. 74 yd3 96. 8 in 99. 8 in Standards · ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria SAE J1040 MAY94, ISO 3471:1994 DLV criteria SAE J397B, ISO 3164:1995. · FOPS (Falling Object Protective Structure) meets SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II, DLV criteria SAE J397B, ISO 3164:1995. · Brakes meet SAE J/ISO 10265 MAR99, ISO 10265:1998. · The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 79 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. · The operator sound pressure level measured according to the procedures specified in ISO 6396:1992 is 74 dB(A) for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. · Hearing protection is recommended when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment. · The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 76 dB(A). · The labeled sound power level is 109 dB(A) measured according to the test procedure and conditions specified in 2000/14/EC. · Engine ratings at 2, 000 rpm. EPA Tier 3, European Union Stage III A and Japan MLIT Step 3 Emission regulations. [. . . ] See your Caterpillar dealer for available options. CAT, CATERPILLAR, SAFETY. CAT. COM, their respective logos, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are 12 trademarks of Caterpillar and may not be used without permission. [. . . ]