User manual CATERPILLAR CL115 BROCHURE

[. . . ] Driven by customer input, Caterpillar's aftertreatment regeneration solution ensures the machine works with no operator intervention needed. The machine comes with two modes of regeneration: automatic and manual. In automatic mode, the machine starts the regeneration process once the filtering system reaches a certain level and conditions are optimal. The system will not interrupt the work process and can regenerate during machine operation. [. . . ] Each bucket durability type is available as pin-on or can be used with a Quick Coupler. Red areas on bucket images illustrate additional protection against wear as it increases across each category. 8 General Duty (GD) GD buckets are for digging in low-impact, low-abrasion material such as dirt, loam, and mixed compositions of dirt and fine gravel. Heavy Duty (HD) The most popular bucket style, HD buckets are a good starting point when digging conditions are not well known like a wide range of impact and abrasion conditions that include mixed dirt, clay, and rock. 1 2 Severe Duty (SD) SD buckets are for higher abrasion conditions such as well shot granite and caliche. Extreme Duty (XD) XD buckets are the new standard for high-abrasion conditions, including high quartzite granite. 3 4 Specialty Buckets In addition to the four levels of bucket durability categories, several specialty buckets are available for the CL115, each with a different purpose: · · Ditch cleaning for cleaning ditches, slope grading, and other finish work Center-Lock Pin Grabber Performance for maximum digging performance while keeping the versatility and convenience of a coupler Power for use in abrasive applications where breakout force and cycle times are critical Wide tip for low-impact material where leaving a smoother floor and minimal spillage are necessary 1) General Duty 2) Heavy Duty 3) Severe Duty 4) Extreme Duty · · Hydraulic Kits Caterpillar offers field-installed hydraulic kits that are uniquely designed to integrate Cat Work Tools with Cat excavators. Hoses and tubes are pre-made, pre-shaped, and pre-painted to make installation quick and easy. Comprehensive Product Support All Cat Work Tools are backed up by a world-wide network of well-stocked parts depots and highly experienced service and support personnel. 9 1 Integrated Technologies Cat® Grade Control Depth and Slope This optional system combines traditional machine control and guidance with standard factory-installed and calibrated components, making the system ready to go to work the moment it leaves the factory. The system utilizes internal front linkage sensors ­ well protected from the harsh working environment ­ to give operators real-time bucket tip position information through the cab monitor (1), which minimizes the need and cost for traditional grade checking and improves job site safety. It also helps the operator complete jobs in fewer cycles, which means less fuel use. 1 2 Steps, Hand and Guard Rails Steps on the track frame and storage box (2) along with extended hand and guard rails (3) to the upper deck enable operators to more securely work on the machine. Time Delay Cab and Boom Lights For a predetermined amount of time after the engine start key has been turned to the "OFF" position, lights will be illuminated to enhance visibility. The time delay can vary from 0 to 90 seconds, which can be set through the monitor. High Intensity Discharge (HID) Lights Cab lights operate on a time delay for enhanced safety; lights can be upgraded to HID for greater night time visibility. Visibility ­ Windows 3 Increased glass coverage enhances visibility while meeting the latest ROPS regulations. The 70/30 split configuration features an upper window equipped with handles on the top and both sides so the operator can easily slide it to store in the ceiling. The lower window is removable and can be stored on the left wall of the cab shell. The large skylight provides enhanced overhead visibility, excellent natural lighting, and good ventilation. 19 CL115 Hydraulic Excavator Specifications Bucket and Stick Forces Super Long Reach Boom 10. 2 m (33'6") A-Family Bucket Super Long Reach 7. 85 m (25'9") kN (lbf) ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ 60. 49 (13, 600) 45. 16 (10, 150) HD Reach Booms 6. 15 m (20'2") CB-Family Bucket Stick R3. 2CB2 (10'6") kN (lbf) General Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (SAE) Stick Digging Force (SAE) General Duty Capacity Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (SAE) Stick Digging Force (SAE) Heavy Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (SAE) Stick Digging Force (SAE) Heavy Duty ­ Power Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (SAE) Stick Digging Force (SAE) Severe Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (SAE) Stick Digging Force (SAE) Ditch Cleaning Bucket Digging Force (ISO) Stick Digging Force (ISO) 180 (40, 500) 126 (28, 300) 161 (36, 200) 123 (27, 700) 175 (39, 300) 125 (28, 100) 158 (35, 500) 122 (27, 400) 179 (40, 200) 126 (28, 300) 158 (35, 500) 123 (27, 700) 196 (44, 100) 128 (28, 800) 172 (38, 700) 124 (27, 900) 179 (40, 200) 126 (28, 300) 158 (35, 500) 123 (27, 700) ­ ­ R2. 65CB2 (8'8") kN (lbf) 180 (40, 500) 145 (32, 600) 161 (36, 200) 141 (31, 700) 175 (39, 300) 143 (32, 100) 158 (35, 500) 139 (31, 200) 179 (40, 200) 145 (32, 600) 158 (35, 500) 140 (31, 500) 196 (44, 100) 147 (33, 000) 172 (38, 700) 141 (31, 700) 179 (40, 200) 145 (32, 600) 158 (35, 500) 140 (31, 500) ­ ­ Mass Boom 5. 55 m (18'3") DB-Family Bucket M2. 5DB (8'2") kN (lbf) 212 (47, 700) 153 (34, 400) 188 (42, 300) 148 (33, 300) ­ ­ ­ ­ 210 (47, 200) 152 (34, 200) 185 (41, 600) 147 (33, 000) ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ 20 HD Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 6. 15 m (20'2") Stick ­ R3. 2CB2 (10'6") 1. 5 m/5. 0 ft 3. 0 m/10. 0 ft Counterweight ­ 5. 8 mt (6. 3 t) Shoes ­ 800 mm (32") triple grouser with step 4. 5 m/15. 0 ft 6. 0 m/20. 0 ft 7. 5 m/25. 0 ft Bucket ­ None 9. 0 m/30. 0 ft m ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line ­1. 5 m ­5. 0 ft ­3. 0 m ­10. 0 ft ­4. 5 m ­15. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb *6750 *15, 050 *12 100 *27, 150 *6750 *15, 050 *12 100 *27, 150 *10 600 *24, 050 *17 150 *38, 900 *19 750 *42, 500 *10 600 *24, 050 *17 150 *38, 900 *19 750 *42, 500 *14 150 *30, 450 *16 900 *36, 450 *18 150 *39, 300 *18 150 *39, 350 *17 050 *36, 900 *14 500 *31, 150 12 400 26, 700 11 650 25, 100 11 300 24, 300 11 200 24, 100 11 250 24, 250 11 500 24, 750 *9200 *19, 950 *10 750 *23, 250 *12 200 *26, 400 12 100 26, 000 11 950 25, 700 12 000 25, 750 *10 750 *22, 750 8500 18, 350 8150 17, 550 7750 16, 750 7550 16, 200 7400 15, 950 7450 16, 000 7600 16, 400 *7850 *16, 700 *8350 *18, 200 9050 19, 400 8800 18, 950 8650 18, 600 8600 18, 450 8600 18, 600 6200 13, 300 6100 13, 050 5900 12, 650 5700 12, 250 5550 11, 950 5500 11, 800 5500 11, 900 *6500 6750 *13, 700 4500 4400 9, 450 *5600 *12, 400 *5350 *11, 750 *5300 *11, 650 *5450 *12, 000 *5800 *12, 700 *6350 *14, 000 7200 15, 800 8250 18, 300 *9400 *20, 700 *5600 *12, 400 5300 *11, 750 4700 10, 350 4400 9, 650 4250 9, 350 4350 9, 550 4650 10, 250 5300 11, 750 6850 15, 300 7. 27 23. 54 8. 23 26. 83 8. 82 28. 88 9. 13 29. 95 9. 19 30. 15 8. 99 29. 50 8. 52 27. 93 7. 74 25. 28 6. 51 21. 13 Boom ­ 6. 15 m (20'2") Stick ­ R3. 2CB2 (10'6") 1. 5 m/5. 0 ft 3. 0 m/10. 0 ft Counterweight ­ 5. 8 mt (6. 3 t) Shoes ­ 700 mm (28") triple grouser 4. 5 m/15. 0 ft 6. 0 m/20. 0 ft 7. 5 m/25. 0 ft Bucket ­ None 9. 0 m/30. 0 ft m ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line ­1. 5 m ­5. 0 ft ­3. 0 m ­10. 0 ft ­4. 5 m ­15. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb *6750 *15, 050 *12 100 *27, 150 *6750 *15, 050 *12 100 *27, 150 *10 600 *24, 050 *17 150 *38, 900 *19 750 *42, 500 *10 600 *24, 050 *17 150 *38, 900 *19 750 *42, 500 *14 150 *30, 450 *16 900 *36, 450 *18 150 *39, 300 *18 150 *39, 350 *17 050 *36, 900 *14 500 *31, 150 12 200 26, 250 11 450 24, 700 11 100 23, 850 11 000 23, 650 11 050 23, 800 11 300 24, 300 *9200 *19, 950 *10 750 *23, 250 12 150 26, 100 11 850 25, 500 11 750 25, 200 11 750 25, 250 *10 750 *22, 750 8400 18, 050 8000 17, 250 7650 16, 450 7400 15, 900 7250 15, 650 7300 15, 700 7450 16, 100 *7850 *16, 700 *8350 *18, 200 8850 19, 050 8650 18, 600 8500 18, 250 8400 18, 100 8450 18, 200 6100 13, 100 5950 12, 850 5800 12, 450 5600 12, 050 5450 11, 700 5400 11, 600 5400 11, 700 *6500 6600 *13, 700 4400 4300 9, 250 *5600 *12, 400 *5350 *11, 750 *5300 *11, 650 *5450 *12, 000 *5800 *12, 700 *6350 *14, 000 7050 15, 500 8100 17, 950 *9400 *20, 700 *5600 *12, 400 5250 11, 600 4600 10, 200 4300 9, 450 4200 9, 200 4250 9, 350 4550 10, 050 5200 11, 550 6700 15, 000 7. 27 23. 54 8. 23 26. 83 8. 82 28. 88 9. 13 29. 95 9. 19 30. 15 8. 99 29. 50 8. 52 27. 93 7. 74 25. 28 6. 51 21. 13 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 21 CL115 Hydraulic Excavator Specifications HD Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 6. 15 m (20'2") Stick ­ R2. 65CB2 (8'8") 1. 5 m/5. 0 ft 3. 0 m/10. 0 ft Counterweight ­ 5. 8 mt (6. 3 t) Shoes ­ 800 mm (32") triple grouser with step 4. 5 m/15. 0 ft 6. 0 m/20. 0 ft 7. 5 m/25. 0 ft Bucket ­ None m ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line ­1. 5 m ­5. 0 ft ­3. 0 m ­10. 0 ft ­4. 5 m ­15. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb *19, 150 *8900 *19, 450 *10 000 *21, 700 *11 450 *24, 800 12 350 26, 600 12 150 26, 100 12 050 25, 950 12 150 26, 100 18, 950 8750 18, 800 8450 18, 200 8100 17, 450 7800 16, 750 7600 16, 350 7500 16, 200 7600 16, 350 *7350 *16, 300 *6900 *15, 250 *6850 *15, 050 *7000 *15, 400 7100 15, 600 7300 16, 050 7950 17, 500 9350 20, 750 *9550 *20, 900 *7350 *16, 300 5900 13, 100 5150 11, 350 4750 10, 500 4650 10, 200 4750 10, 450 5150 11, 350 6000 13, 350 8150 18, 400 6. 67 21. 52 7. 70 25. 08 8. 33 27. 26 8. 66 28. 40 8. 72 28. 61 8. 51 27. 92 8. 01 26. 26 7. 17 23. 42 5. 83 18. 85 *10 350 *23, 600 *19 400 *44, 200 *17 250 *10 350 *23, 600 *19 400 *44, 200 *17 250 *12 250 *26, 350 *15 450 *33, 250 *16 500 *38, 400 *17 550 *40, 000 *17 950 *38, 950 *16 400 *35, 450 *13 100 *27, 900 *12 250 *26, 350 12 200 26, 300 11 600 25, 000 11 350 24, 450 11 350 24, 400 11 450 24, 700 11 750 25, 350 *8350 *15, 750 *8950 *19, 550 9050 19, 400 8850 19, 000 8700 18, 750 8700 18, 700 6150 13, 200 6050 13, 050 5900 12, 700 5750 12, 350 5600 12, 100 5600 12, 050 Boom ­ 6. 15 m (20'2") Stick ­ R2. 65CB2 (8'8") 1. 5 m/5. 0 ft 3. 0 m/10. 0 ft Counterweight ­ 5. 8 mt (6. 3 t) Shoes ­ 700 mm (28") triple grouser 4. 5 m/15. 0 ft 6. 0 m/20. 0 ft 7. 5 m/25. 0 ft Bucket ­ None m ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line ­1. 5 m ­5. 0 ft ­3. 0 m ­10. 0 ft ­4. 5 m ­15. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb *19, 150 *8900 *19, 450 *10 000 *21, 700 *11 450 *24, 800 12 150 26, 100 11 900 25, 600 11 850 25, 450 11 900 25, 600 18, 650 8600 18, 500 8300 17, 900 7950 17, 150 7650 16, 450 7450 16, 050 7400 15, 900 7450 16, 050 *7350 *16, 300 *6900 *15, 250 *6850 *15, 050 *7000 *15, 400 6950 15, 300 7150 15, 750 7800 17, 150 9200 20, 350 *9550 *20, 900 7300 *16, 300 5800 12, 900 5050 11, 150 4700 10, 300 4550 10, 050 4650 10, 250 5050 11, 100 5900 13, 100 8050 18, 050 6. 67 21. 52 7. 70 25. 08 8. 33 27. 26 8. 66 28. 40 8. 72 28. 61 8. 51 27. 92 8. 01 26. 26 7. 17 23. 42 5. 83 18. 85 *10 350 *23, 600 *19 400 *44, 200 *17 250 *10 350 *23, 600 *19 400 *44, 200 *17 250 *12 250 *26, 350 *15 450 *33, 250 *16 500 *38, 400 *17 550 *40, 000 *17 950 *38, 950 *16 400 *35, 450 *13 100 *27, 900 *12 250 *26, 350 12 000 25, 850 11 400 24, 550 11 150 24, 000 11 150 23, 950 11 250 24, 250 11 550 24, 900 *8350 *15, 750 *8950 19, 400 8850 19, 050 8700 18, 650 8550 18, 400 8500 18, 350 6050 12, 950 5950 12, 800 5800 12, 450 5650 12, 100 5500 11, 850 5500 11, 800 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. [. . . ] They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. [. . . ]