User manual CATERPILLAR CM230 BROCHURE

[. . . ] In applications such as production trenching, speed is important and the system will match the flow needed to get the job done quickly and efficiently. The load-sensing hydraulic system also delivers: · · · · A cooler hydraulic system Better fuel efficiency Quieter operation Reduced wear on components Cat XTTM-3 ES ToughGuardTM hoses combined with Cat couplings and O-ring face seal fittings provide a leak-free system. The CM230 also features new flow-sharing hydraulic valves, ensuring proportional flow of oil to all hydraulic cylinders, providing greater control and improving multifunction performance. Ride Control Delivers even greater operator comfort. The optional Ride Control System smoothes the ride in all conditions, including load and carry, highway roading, or simply moving around the job site. It reduces machine loping, providing a smooth and stable ride for increased operator comfort and reduced operator fatigue. [. . . ] Axles feature outboard planetary gear sets for easy serviceability and brake design improvements for longer service life. · · Brake Mode Selector The brake mode selector switch has three positions: two wheel drive, two wheel drive with all wheel braking and four wheel drive. Two wheel drive with all wheel braking provides better tire life while roading and engages the front axle when brakes are applied for improved braking performance. 5 Backhoe Designed for high performance and easy service. The E-Series backhoe delivers industry-leading digging forces. Serrated edges on the stick provide improved material clamping for clearing and demolition applications. The single pin bucket linkage contributes to best-in-class rotation of 205 degrees for all applications. E-Stick Design The optional extendible stick (E-stick) increases reach and dig depth by approximately 1. 2 meters (4 feet). The new design delivers increased life and easy in-field adjustment with common hand tools. Curved Boom The excavator-style boom is built for optimum performance and durability. The curved design provides additional clearance over obstacles while digging a trench or truck loading. The narrow boom enhances the viewing area to the bucket and trench throughout the entire operating range. Thumbs Thumb mounting provisions are standard on every Cat Backhoe Loader for added machine versatility. Hydraulic thumbs are available factory-installed. Mechanical thumbs are available through your Cat Dealer. Loader Strong lift and breakout. Single Tilt The standard single tilt loader linkage on the CM230 features strong lift and breakout forces for solid performance in backfilling and truck loading applications. The CM230 is equipped with either a general purpose or multi-purpose pin-on bucket to meet your specific needs. Return-to-Dig The return-to-dig system reduces loading cycle times by bringing the loader bucket back to the dig position with an easy pull of the lever. By the time the loader bucket is at ground level, the bucket is angled correctly for the next load or cut. 6 Technology Products AccuGradeTM System The AccuGrade system for backhoe loaders improves digging accuracy and site safety by eliminating the need for manual grade measuring. · Used 35° API gravity fuel having an LHV of 42 780 kJ/kg (18, 390 BTU/lb) when used at 30° C (89° F) (reference a fuel density of 838. 9 g/L [7. 001 lb/gal]). · No derating required up to 3000 m (9, 843 ft). · Net torque rise meets SAE J1349. · Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals. · Front and rear crankshaft oil seals are "lip" type Viton and PTFE designs featuring an integral dust lip. · For durability, inlet valves are nitrided, martensitic chrome silicon steel, while exhaust valves are nitrided, austenitic chrome manganese-nickel steel. · Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life. · Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness. Intake and exhaust ports are precision cast to promote optimum gas flow. · Direct injection fuel system provides accurate fuel delivery and efficiency. · Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator. [. . . ] of Teeth 3 3 4 5 5 6 Rated Capacity L ft3 181 6. 4 241 8. 5 320 11. 3 380 13. 4 Weight kg 153 179 197 223 lb 336 395 434 491 No. of Teeth 4 5 5 6 Rated Capacity L ft3 70 2. 5 127 4. 5 198 7. 0 255 9. 5 311 11. 5 Weight kg lb 120 265 150 331 175 386 195 430 210 463 No. of Teeth 3 4 5 5 6 13 CM230 Backhoe Loader Specifications Machine Dimensions Single-Tilt Loader General Purpose (0. 96 m3/1. 25 yd3) mm ft/in 7321 24 ft 0 in 7293 23 ft 11 in 3577 11 ft 9 in 3631 11 ft 11 in 2322 7 ft 7 in 2819 9 ft 3 in 2754 9 ft 0 in 365 1 ft 2 in 320 1 ft 1 in 2704 8 ft 10 in 1880 6 ft 2 in 1727 5 ft 8 in 2200 7 ft 3 in (1) Overall transport length Overall length (loader on ground) (2) Overall transport height (standard stick) Overall transport height (extendible stick) Overall width (3) Height to top of cab/canopy (4) Height to top of exhaust stack Height to loader hinge pin (transport) Ground clearance (minimum) (5) Rear axle centerline to front grill Front wheel tread gauge Rear wheel tread gauge (6) Wheelbase 2WD/4WD General Purpose (0. 76 m3/1. 0 yd3) mm ft/in 7233 23 ft 9 in 7180 23 ft 7 in 3577 11 ft 9 in 3631 11 ft 11 in 2322 7 ft 7 in 2819 9 ft 3 in 2754 9 ft 0 in 365 1 ft 2 in 320 1 ft 1 in 2704 8 ft 10 in 1880 6 ft 2 in 1727 5 ft 8 in 2200 7 ft 3 in Multi Purpose (1. 0 m3/1. 3 yd3) mm ft/in 7285 23 ft 11 in 7209 23 ft 8 in 3577 11 ft 9 in 3631 11 ft 11 in 2322 7 ft 7 in 2819 9 ft 3 in 2754 9 ft 0 in 417 1 ft 4 in 320 1 ft 1 in 2704 8 ft 10 in 1880 6 ft 2 in 1727 5 ft 8 in 2200 7 ft 3 in Loader Bucket Dimensions and Performance Single-Tilt Loader General Purpose (0. 96 m3/1. 25 yd3) 0. 96 m3 1. 25 yd3 2262 mm 7 ft 5 in 2427 kg 5, 351 lb 38. 1 kN 8, 565 lb 3296 mm 10 ft 10 in 44° 2573 mm 8 ft 5 in 853 mm 2 ft 10 in 39° 106 mm 4 in 107° N/A 1516 mm 5 ft 0 in 4196 mm 13 ft 9 in N/A N/A 451 kg 994 lb (7) (8) (9) (10) (11) (12) (13) Capacity (SAE rated) Width Lift capacity at maximum height Breakout force Maximum hinge pin height Dump angle at full height Dump height at maximum angle Dump reach at maximum angle Maximum bucket rollback at ground level Digging depth Maximum grading angle Width of dozer cutting edge Grill to bucket cutting edge, carry position Maximum operating height Jaw opening maximum Bucket jaw clamping force Weight (does not include teeth or forks) General Purpose (0. 76 m3/1. 0 yd3) 0. 76 m3 1. 0 yd3 2262 mm 7 ft 5 in 2547 kg 5, 615 lb 40. 9 kN 9, 185 lb 3296 mm 10 ft 10 in 44° 2651 mm 8 ft 8 in 772 mm 2 ft 6 in 39° 106 mm 4 in 110° N/A 1428 mm 4 ft 8 in 4063 mm 13 ft 4 in N/A N/A 384 kg 847 lb Multi Purpose (1. 0 m3/1. 3 yd3) 1. 0 m3 1. 3 yd3 2279 mm 7 ft 6 in 2225 kg 4, 905 lb 37. 2 kN 8, 363 lb 3296 mm 10 ft 10 in 44° 2624 mm 8 ft 7 in 761 mm 2 ft 6 in 40° 133 mm 5 in 110° 2262 mm 7 ft 5 in 1480 mm 4 ft 10 in 4244 mm 13 ft 11 in 790 mm 2 ft 7 in 50. 6 kN 11, 385 lb 745 kg 1, 642 lb 14 Backhoe Dimensions and Performance Standard Stick 4360 mm 14 ft 4 in 4321 mm 14 ft 2 in 6721 mm 22 ft 1 in 5618 mm 18 ft 5 in 5523 mm 18 ft 1 in 3636 mm 11 ft 11 in 1768 mm 5 ft 10 in 180° 205° 3310 mm 10 ft 10 in 3770 mm 12 ft 4 in 2322 mm 7 ft 7 in 51. 8 kN 11, 655 lb 31. 8 kN 7, 151 lb Extendible Stick Retracted 4402 mm 14 ft 5 in 4363 mm 14 ft 4 in 6760 mm 22 ft 2 in 5657 mm 18 ft 7 in 5555 mm 18 ft 3 in 3577 mm 11 ft 9 in 1868 mm 6 ft 2 in 180° 205° 3310 mm 10 ft 10 in 3770 mm 12 ft 4 in 2322 mm 7 ft 7 in 51. 1 kN 11, 491 lb 31. 8 kN 7, 151 lb Extendible Stick Extended 5456 mm 17 ft 11 in 5420 mm 17 ft 10 in 7769 mm 25 ft 6 in 6666 mm 21 ft 10 in 6302 mm 20 ft 8 in 4145 mm 13 ft 7 in 2771 mm 9 ft 1 in 180° 205° 3310 mm 10 ft 10 in 3770 mm 12 ft 4 in 2322 mm 7 ft 7 in 51. 1 kN 11, 491 lb 23. 4 kN 5, 250 lb (14) Digging depth, SAE (max. ) (15) Digging depth, 610 mm (2 ft) flat bottom Reach from rear axle centerline at ground line (16) Reach from swing pivot at ground line Maximum operating height Loading height (17) Loading reach Swing arc Bucket rotation (18) Stabilizer spread, operating position (center) (19) Stabilizer spread, operating position (outside) Stabilizer spread, transport position Bucket dig force Stick dig force Dimensions and performance specifications shown are for machines equipped with 12. 5/80-18 SGL front tires, 19. 5L-24 IT525 rear tires, ROPS canopy, standard stick with 610 mm (24 inch) standard-duty bucket, and 0. 76 m3 (1. 0 yd3) loader bucket and standard equipment unless otherwise specified. Single Tilt Loader 15 CM230 Backhoe Loader Specifications Backhoe Lift Capacity Cat CM230 Standard Stick Boom Lifting 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Stick Lifting 16 17 18 19 20 21 Cat CM230 Extendible Stick ­ Retracted Boom Lifting 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Stick Lifting 16 17 18 19 20 21 22 kg 1262 1378 1394 1356 1306 1253 1202 1153 1107 1065 1028 995 972 973 1081 kg 1297 1827 2195 2275 2645 5285 lb 2, 776 3, 031 3, 066 2, 984 2, 873 2, 757 2, 643 2, 536 2, 436 2, 344 2, 261 2, 190 2, 138 2, 141 2, 377 lb 2, 853 4, 020 4, 828 5, 005 5, 818 11, 627 m 6 1 2 3 16 17 18 17 19 20 21 5 4 3 2 1 0 11 12 13 14 15 ­1 ­2 ­3 ­4 ­5 ft 20 18 16 14 12 10 8 6 4 2 0 ­2 ­4 ­6 ­8 ­10 ­12 ­14 ­16 4 5 6 7 8 9 10 m 6 5 4 3 2 1 0 ­1 ft 22 20 18 16 14 12 10 8 6 4 2 0 ­2 kg 1084 1186 1190 1149 1096 1042 988 938 890 846 805 768 738 722 788 kg 1155 1672 1992 2063 2395 4688 5059 lb 2, 385 2, 608 2, 618 2, 527 2, 412 2, 291 2, 174 2, 063 1, 958 1, 860 1, 771 1, 690 1, 623 1, 589 1, 734 lb 2, 541 3, 679 4, 382 4, 539 5, 269 10, 313 11, 129 m 6 1 2 3 16 17 4 18 5 19 17 20 6 7 8 9 10 11 12 13 14 15 10 5 4 3 21 22 2 1 0 ­1 ­2 ­3 ­4 ­5 ft 20 18 16 14 12 10 8 6 4 2 0 ­2 ­4 ­6 ­8 ­10 ­12 ­14 ­16 m 6 5 4 3 2 1 0 ­1 ft 22 20 18 16 14 12 10 8 6 4 2 0 ­2 Lift capacities are over-end values. Machine equipped with 4WD, OROPS, 0. 76 m3 (1. 0 yd3) general purpose bucket, and 116 kg (255 lb) counterweight. [. . . ]