User manual CATERPILLAR SU482 DN BROCHURE

[. . . ] On-demand Flexxaire fan activates only when required and allows the cooling fan to purge debris from the radiator area, keeping a cleaner cooling system. The IQAN control system automatically adjusts the Flexxaire fan blade angle, reducing horsepower demand and lowering fuel consumption. The purge cycle frequency and duration can be set by operator in the cab to suit varying application conditions. Engine Oil Cat engine oil is formulated to optimize engine life and performance and is recommended for use in Cat diesel engines. Extended oil change intervals reduce maintenance and machine downtime. Service The clamshell engine compartment provides easy access to all filters, oil dipstick, coolant reservoir, hydraulic fill pump, valves and hoses reducing maintenance time. Low Exhaust Emissions The Cat C9 ACERT engine is a low emission engine designed to meet U. S. [. . . ] Optional hydraulics for dangle harvesting or processor heads and intermittent saw heads are available for all models. Valve Design Flexibility Two hydraulic implement valves are available to allow configuration of machine to operate various felling heads. Valve designs allow maximizing of machine multi-functioning performance. Valve 1) Felling heads requiring high flow 170-190 L/min (45-50 gpm) to the grab and accumulator arms. Typically have one cylinder operating each arm, two cylinders per arm set. Valve 2) Felling heads requiring low flow 110-120 L/min (29-32 gpm) to operate grab and accumulator arms. Typically one hydraulic cylinder and a link arm activate the arm set. Note: Consult the work tool manufacturer for flow requirements before selecting one of the above Hydraulic Arrangements. Cat Hydraulic Oil Provides maximum protection against mechanical and corrosive wear in all hydraulic systems. It's high zinc content reduces wear, and extends pump life. Biodegradable hydraulic oil (HEES) is also available from your Cat dealer and provides an environmentally-sound alternative to mineral based oils. ToughGuardTM Hoses Abrasion resistant hoses along the boom and stick provide strength and flexibility. The ToughGuard cover consists of a thin layer of UHMW polyethylene bonded to the rubber cover, providing exceptional abrasion resistance. 4 Operator Station Superior comfort and visibility Operator Comfort The operator station is designed with conveniently placed joysticks and an ergonomically designed air ride seat, reducing operator fatigue and providing easy operation. An HVAC system with updated air ducts provides better cooling and heating. · Major structures and components are built to be rebuilt, reducing waste and replacement costs. 9 Serviceability Extended Service Intervals Easy servicing and extended service intervals Caterpillar service and maintenance intervals have been extended to reduce machine service time, increase machine availability and reduce operating costs. Hydraulic oil change intervals can be extended from 2, 000 hours to 4, 000 hours. Engine coolant change intervals are 12, 000 hour with Cat Extended Life Coolant/Anti-freeze. Regularly scheduled maintenance extends machine service life and lowers overall operating costs. 500-hour oil change interval reduces overall maintenance costs. Flexxaire Fan Standard Flexxaire fan operates only when required and allows the cooling fan to purge debris from the radiator area, reducing cleaning maintenance time. The purge cycle frequency and duration can be set by operator in the cab to suit varying application conditions. Clam-Shell Service Doors The hydraulically actuated clam-shell service doors on both sides of machine provide easy and quick access, reducing maintenance downtime. 10 Customer Support Count on your Cat dealer Caterpillar is known the world over for the quality of customer support from its dealer network ­ the industry's best. No matter where you are, the expertise of a Cat dealer is always nearby. Your local Cat dealer is your forestry consultant who can recommend the machines, work tools and services to maximize your operation and provide the support to keep you at top productivity. · 24-hour parts availability, where and when you need them, to minimize expensive downtime · Remanufactured parts that carry the same warranty as new parts at a reduced cost · Operator training to get the most out of your Cat equipment · Field services to provide on-site help when needed · Timely repair and replacement services · Customer Support Agreements to lower your operating costs · State-of-the-art diagnostic programs, such as S·O·SSM oil analysis, inspection services and trend reporting to help avoid unscheduled repairs · Financing programs for buying, renting or leasing Cat equipment · C at® Access Account, a fast and convenient way to pay for or rent anything offered at any Cat dealer or The Cat Rental Store · Cat Insurance to cover equipment losses from theft, collision, flood, upset or overturn, fire, vandalism and more · Product Link to manage your equipment fleet through remote monitoring · Cat Certified Rebuild to get a second life from your equipment For more information on Cat products, dealer services and industry solutions, visit www. cat. com. 11 SU482 DN Series 2/552 Series 2 Specifications Power Train Engine Model Gross Power @ 1, 800 rpm Rated Power@ 2, 100 rpm Displacement Cat® C9 ACERTTM 226 kW 303 hp 210. 3 kW 537 in3 282 hp 8. 8 L Boom System Max. *All SU482 DN Series 2/552 Series 2 TFB models are shipped in the maximum width gauge configuration. These illustrations and values are ESTIMATED for TRUCK SHIPMENT ONLY FROM THE FACTORY. [. . . ] ** with HF 221 Partial Tilt Felling Head, boom and stick extended, head tilted back (assumes an estimated additional head weight of 3783 kg [8, 340 lb]) **All SU482 DN Series 2/552 Series 2 TFB models are shipped in the maximum width gauge configuration. These illustrations and values are ESTIMATED for TRUCK SHIPMENT ONLY FROM THE FACTORY. These are subject to change based on attachments, configurations, add-ons, etc. 3 4 14 FTS Series 2 Track Feller Bunchers Shipping Dimensions All dimensions are approximate. SU482 DN Series 2 (Non-Tilter) 552 Series 2 (Tilter) Long Felling Linkage H H L L 1 Length 2 Height to top of cab with standard skylight 3 Width ­ minimum width 4 Width ­ maximum width when undercarriage is set wide** Weight SU482 DN Series 2 11 074 mm (436 in) 3556 mm (140 in) 3327 mm (131 in) 3607 mm (142 in) 31 135 kg (68, 640 lb) SU482 DN Series 2* 13 360 mm (526 in) 3556 mm (140 in) 3327 mm (131 in) 3607 mm (142 in) 34 918 kg (76, 980 lb) 552 Series 2 11 024 mm (434 in) 3962 mm (156 in) 3327 mm (131 in) 3607 mm (142 in) 36 124 kg (79, 639 lb) 552 Series 2* 13 310 mm (524 in) 3962 mm (156 in) 3327 mm (131 in) 3607 mm (142 in) 39 907 kg (87, 979 lb) Length, height and width assume 711 mm (28 in) SG shoes. ** with HF 221 Partial Tilt Felling Head, boom and stick extended, head tilted back (assumes an estimated additional head weight of 3783 kg [8, 340 lb]) **All SU482 DN Series 2/552 Series 2 TFB models are shipped in the maximum width gauge configuration. [. . . ]