User manual CDA SVW140

[. . . ] ON-OFF light 1 2 3 WARMING DRAWER The control parts are the temperature knob and the luminous ON-OFF switch. With the switch pressed (position 1) the drawer is on, whereas with the switch released (position 0) the drawer is off. These parts are visible only when the drawer is open. When the drawer is closed, a control light on the front of the appliance indicates if the drawer is switched on. OPERATION Place the dishes in the drawer Set a temperature Switch the appliance on; the switch lights up Close the drawer gently Switch the appliance off before removing the warmed dishes. 4 SELECTING THE TEMPERATURE The temperature knob enables a temperature adjustment of between approx. [. . . ] · Use the special oven gloves to remove hot dishes and heated food (depending on the model). · Pressing the On button switches on the warmer drawer heating; risk of burns. screwdrivers, sharp objects, papers, etc. ) in the heating element and fan protection grill openings. BEFORE USING THE WARMING DRAWER When using the appliance for the first time, clean it as follows: - clean the surface with a damp cloth, then dry. - Preheat the empty drawer for at least 2 hours: turn the temperature knob to the max. temperature, in order to eliminate any manufacturing residuals (grease, oil or resins) which could cause unpleasant odours during cooking. As some of these odours can be unpleasant we advise that the kitchen is well ventilated during this procedure. After carrying out this simple operation, the appliance will be ready for first use. Before using the appliance, remove: - stickers on the front and warming drawer door, except the rating plate; - cardboard protection and protective plastic film from all the aesthetic parts, if present, and from the front panel controls and other parts of the warming drawer; - any stickers from the accessories if present. FITTING THE APPLIANCE Safety instructions for drawer installation IMPORTANT: The drawer must be installed into cabinetry, complying with the following instructions. Do not connect the appliances to the electrical supply until they have been correctly installed into cabinetry. Spacers: fix the drawer as shown in figures 1 Before connecting the appliance to the power supply, compare the connection data (voltage and frequency) given on the dataplate with that of the electrical mains. The data must match, otherwise the appliance could become damaged. In case of doubts, contact a qualified technician. Make sure the socket can be easily accessed even after the appliance has been fitted. The dish warmer can only be fitted in combination with other appliances not weighing more than 40 kg and provided with adequate cooling ventilation. Otherwise, the right to the warranty is invalidated, since correct use cannot be guaranteed. For combined appliance installation comply with the instructions given in the relevant use and installation handbook. Fitting and installation of this appliance must only be carried out by qualified personnel who guarantee that the requirements for safe use are met. 5 Important: above the drawer, it is possible to fit the coffee machine, the combined oven or the traditional oven (MAXIMUM WEIGHT 40 KG). Their sizes must be as shown in the following figure. During installation, carefully follow the instructions in the manuals of the coffee machine, the combined microwave and/or traditional oven. Recess measurements The dimensions of the recess are obtained from the size of the dish warmer plus the size of the appliance combined with it. All measurements are given in mm. Height 140 mm 6 ELECTRICAL CONNECTION Contact a qualified technician to carry out the appliance electrical connection. Important: Before connecting the drawer to the domestic power supply to check its operation, always make sure the drawer power cable is correctly fitted and NOT squashed or caught under or behind the drawer or a combined appliance. [. . . ] - Optimum dish warming times are subjective. Therefore we suggest that trials are conducted with your crockery to discover these timings. 8 AFTER-SALES SERVICE Before calling the CDA Customer Care: 1. Try to solve the problem on your own, according to the points described in "Troubleshooting Guide". Switch the appliance off and then on again it to see if the problem has been eliminated. [. . . ]