User manual CELESTRON C60

[. . . ] With it you will enjoy numerous objects in the sky--planets, nebulae, star clusters, galaxies and other astronomical objects. This manual covers both the 76mm equatorial mount model and the 114mm models. The equatorial mount contains setting circles and slow motion cables to make it easier to locate and track astronomical objects. But, before your journey begins take time to read this manual to familiarize yourself with the operation and parts of your telescope. [. . . ] With both eyes open, look through the glass window at the alignment star. If the Star Pointer is perfectly aligned, you will see the red LED dot overlap the alignment star. If the Star Pointer is not aligned, take notice of where the red dot is relative to the bright star. Without moving the main telescope, turn the Star Pointer's azimuth and altitude alignment controls (#4 & #6) until the red dot is directly over the alignment star. 2. 5. If the LED dot is brighter than the alignment star, it may make it difficult to see the star. Turn the variable brightness control counterclockwise, until the red dot is the same brightness as the alignment star. This will make it easier to get an accurate alignment. The Star Pointer is now ready to be used . Remember to always turn the power off after you have found an object. This will extend the life of both the battery and the LED. 7 4. The Celestial - Coordinate System. The celestial-coordinate system is an imaginary projection of the Earth's geographical coordinate system onto the celestial sphere which seems to turn overhead at night. The right ascension setting circle (#25) must be aligned. Choose a bright and easy to find star in a star chart and note the coordinates (right ascension and declination). Find the star in the Star Pointer and 2. Now, rotate the right ascension circle to match the coordinates of the star with the indicator mark. The right ascension setting circle does not move as the telescope moves in right ascension and thus it must by aligned each time you want to use it to find a new object. However, you do not need to use a bright star each time but you can use the object you are currently observing. Now, using a star chart or atlas you can find numerous objects. First move the telescope in declination to the correct declination coordinate. Then move the telescope in right ascension until the indicator points to the correct coordinate. After moving the telescope to the correct celestial coordinates, look through the lower power eyepiece to see if you have located the object you wish to view. If the object is not visible in the eyepiece, gradually pan the telescope, using the right ascension and declination cables, until the object is visible. 5. 6. 5. [. . . ] Celestron Planispheres come in three different models, to match the latitude from which you're observing: Solar Filters (#94133) - The Celestron AstroSolar® filters are safe and allow you to see sunspots as they move across the solar disk. Models available for 76mm and 114mm (#94134) telescopes. T-Adapter (#94177) - T-Adapter (with additional T-Ring) allows you to attach your SLR camera to the rear cell of your Celestron telescope. This turns your telescope into a high power telephoto lens perfect for terrestrial photography and short exposure lunar and filtered solar photography. A full description of all Celestron accessories can be found in the Celestron Accessory Catalog (#93685). 14 CELESTRON TWO YEAR WARRANTY A. [. . . ]