Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CELESTRON TABLETOP 76. We hope that this CELESTRON TABLETOP 76 user guide will be useful to you.
Lastmanuals help download the user guide CELESTRON TABLETOP 76.
Detailed instructions for use are in the User's Guide.
[. . . ] CONTACT: Celestron Technical Support: 310. 803. 5955
Item# 31032
Quick Set-up Guide
2 3
1
Your FirstScope 76EQ includes: optical tube w/tube ring attached; tripod with center support bracket; equatorial mount; latitude adjustment screw; two eyepieces; StarPointer finderscope; counterweight; counterweight bar; two slow motion cables; eyepiece accessory tray;The SkyTM CD software; documentation including owner's manual.
To set up the tripod, spread the legs outward until they are fully extended. [. . . ] Extend the center portion of each of the three tripod legs down 68".
Use the three tightening screws located at the bottom of each leg to secure the extended legs in place.
4
5
6
All three legs should be the same length to provide a level platform for the telescope.
Place the accessory tray on top of the tripod's center leg brace. Thread the tray into the threaded hole in the center of the leg brace.
Properly assembled, the accessory tray should appear as pictured above.
7
8
9
Locate the equatorial mount and place the base of the mount through the hole in the center of the tripod mounting platform.
From underneath the tripod mounting platform, thread the mounting bolt with washer into the threaded hole on the bottom of the equatorial mount.
Thread the latitude adjustment screw into the equatorial mount until it is touching the inside of the mount.
Quick Set-up Guide [cont]
10 11 12
Locate the counterweight bar and counterweight. Remove the knurled nuts on the threaded posts at the focuser end of the telescope tube.
Orient the finderscope so that the glass window is facing towards the front of the tube. Place finderscope over the posts on the tube and tighten it down with the knurled nuts.
19
20
21
Loosen the set screw on the focuser so that it does not obstruct the inner diameter of the focuser.
Insert the chrome barrel of the 20mm eyepiece into the focuser and tighten the set screw.
Remove the lens cap from the front of the telescope. [. . . ] Place finderscope over the posts on the tube and tighten it down with the knurled nuts.
19
20
21
Loosen the set screw on the focuser so that it does not obstruct the inner diameter of the focuser.
Insert the chrome barrel of the 20mm eyepiece into the focuser and tighten the set screw.
Remove the lens cap from the front of the telescope. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CELESTRON TABLETOP 76
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CELESTRON TABLETOP 76 will begin.
