Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CHAMBERLAIN 379E. We hope that this CHAMBERLAIN 379E user guide will be useful to you.
Lastmanuals help download the user guide CHAMBERLAIN 379E.
Detailed instructions for use are in the User's Guide.
[. . . ] NEVER permit anyone to cross path of moving gate or door. Place finger flat above the sensor strip with the top knuckle above the sensor. Swipe finger straight down keeping firm contact with the sensor. The swipe should be a slow, constant speed. [. . . ] NOTE: The Pass LED will light for a passed swipe. The Retry LED will light if another swipe is needed. Swipe slowly and with more pressure if this occurs. After the third passed swipe, the Enroll and Pass LED will flash. New user should swipe finger slowly and firmly down the sensor strip until three passed swipes are made. NOTE: If cover is already open, press either the Resend or the Enroll button to turn unit on. The Pass LED will light for a passed swipe. The Retry LED will light if another swipe is needed. NOTE: If cover is already open, press either the Resend or the Enroll button to turn unit on. Open cover and wait until Ready LED is lit. Swipe finger slowly and firmly down the sensor strip. NOTE: The unit must have an enrolled user before it can be programmed to the opener. Due to the 30 second time interval, a second person may be needed to press the "learn" button. Press and release the "learn" button on the motor unit of the garage door opener. Open cover and wait for Ready LED to light. Within 30 seconds of pressing the 3 "learn" button, slowly and firmly swipe enrolled finger. NOTE: The Retry LED will light if another swipe is needed. NOTE: If cover is already open, press either the Resend or the Enroll button to turn unit on. The Fail or Retry LED will light if another swipe is needed. If this occurs, swipe slowly and with more pressure. It may require multiple swipes to get a passed swipe. while the door is traveling the Send LED will be lit. [. . . ] Replace when the Fail LED flashes during use. Press and hold the Enroll button until all LEDs turn off. Again press and hold the Enroll button until the Ready and Enroll LEDs are lit and not flashing. If no known enrolled users are available: - The memory must be erased using the Factory Reset process. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CHAMBERLAIN 379E
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CHAMBERLAIN 379E will begin.
