User manual CHAMBERLAIN 953D

[. . . ] TM Model 953D 3-Button Security® Remote Control OWNER'S MANUAL For use with 315 MHz Security® garage door openers and light controls that have a purple "learn" button. The code between the remote control and the receiver changes with each use, randomly accessing over a billion new codes. [. . . ] With the door closed, press and hold the remote button that you want to control the light. Press and hold the Light button on the door control. Press and hold the Lock button on the door control. After the opener lights flash, release all buttons. Test by pressing the remote push button. The opener lights should turn on or off but the door should not move. 9 7 5 3 1 9 7 5 3 1 KG KG The Remote Control Battery 1. Press and release the "learn" button on the motor unit. The learn indicator light will glow steadily for 30 seconds. Within 30 seconds, press and hold the button on the hand-held remote. Release the button when the motor unit light blinks. If light bulbs are not installed, two clicks will be heard. To prevent possible SERIOUS INJURY or DEATH: · NEVER allow small children near batteries. · If battery is swallowed, immediately notify doctor. To reduce risk of fire, explosion or chemical burn: · Replace ONLY with 3V2032 coin batteries. · Do NOT recharge, disassemble, heat above 212°F (100°C ) or incinerate. [. . . ] Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1-800-528-9131 114A3104D © 2007, Chamberlain Group Inc. [. . . ]