Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CHAMBERLAIN AS210. We hope that this CHAMBERLAIN AS210 user guide will be useful to you.
Lastmanuals help download the user guide CHAMBERLAIN AS210.
Detailed instructions for use are in the User's Guide.
[. . . ] Dead-man operation mode is only allowed if the unit is visible from the instruction switches and the operators were instructed correspondingly. The operation of the gate control in self-locking mode is only allowed if the protecting equipment required in EN 13241-1 und EN 12453 are used. If you do not respect the safety instructions, you are personally liable for the resulting damages on persons and materials. [. . . ] The value of safety fuse should not exceed 4A. The mains plug must be accessible and installed near by the control. The value of the supply voltage (230V AC or 400V AC) must be set at the screw terminal X6 through the bridge. A wrong connection of the bridge may destroy the control. Change of sense of rotation: after connecting the drive, the sense of rotation must be checked with the key buttons OPEN and CLOSED. If the moving direction does not correspond to the direction of the arrow indicated on the pressed button, so the screw terminals of the connections U and V must be exchanged. To operate from outside, a triple switch (such as KDT 3) can be connected to the screw terminals X3, 4, 5, 6, 7. Optionally, a triple switch can be connected to through the screw terminal X4. If the block of binding posts is not configured, so a jumper must bridge the stop contact. The value of safety fuse should not exceed 4A. The mains plug must be accessible and installed near by the control. The value of the supply voltage (230V AC or 400V AC) must be set at the screw terminal X6 through the bridge. A wrong connection of the bridge may destroy the control. The single-phase drive has to be connected to the screw terminals X2, OPEN, N, CLOSED Change of sense of rotation: after connecting the drive, the sense of rotation must be checked with the key buttons OPEN and CLOSED. If the moving direction does not correspond to the direction of the arrow indicated on the pressed button, so the screw terminals of the connections OPEN and CLOSED must be exchanged. To operate from outside, a triple switch (such as DI 3K) can be connected to the screw terminals X3, 4, 5, 6, 7. Optionally, a triple switch can be connected to through the screw terminal X4. If the block of binding posts is not configured, so a jumper must bridge the stop contact. [. . . ] The line of external instruction devices must be installed safe according to protective earthing (double insulation). Here both key buttons related to OPEN and CLOSED should be executed as closer. As the key button related to stop in the safety circuit is already configured, it must be connected as opener. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CHAMBERLAIN AS210
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CHAMBERLAIN AS210 will begin.
