Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CHAMBERLAIN RA7524. We hope that this CHAMBERLAIN RA7524 user guide will be useful to you.
Lastmanuals help download the user guide CHAMBERLAIN RA7524.
Detailed instructions for use are in the User's Guide.
[. . . ] By changing the dip switch setting (SW1) inside the wall switch. the previously installed code remains stored. However the drive cannot be operated by this wall switch anymore. [. . . ] observe shutter or sun-blind system carefully whilst in operation. Only those spare parts, tools and other equipment as have been approved by Chamberlain may be used. Fit control facilities within sight of the product to be controlled at a height of at least 1. FUNCTIONALITY The radio-controlled wall switch is equipped with two buttons one each for UP and DOWN. One button sends a signal for opening the shutter while the other closes it. If the button for the other direction is pressed when the shutter is in motion, the shutter stops. The switch can also be used to operate several drives providing they are within its range (same room). Automatic function: The user can program any set time required for UP or DOWN or for both. PROGRAMMING RADIO REMOTE CONTROLS (HAND-HELD TRANSMITTERS) Please note: In the following text, the radio-controlled wall switch is often described as a remote control because the device concerned is a permanently mounted remote control (wall switch). PROGRAMMING A NEW, ADDITIONAL REMOTE CONTROL (not the first one or so-called master) PLEASE NOTE: The following steps must be executed quickly. The easiest way is for a second person to help by reading out the text while the other person presses the buttons. Step 1: The shutter should not be located at its limit. via the master remote control: Step 2: Press and hold the STOP button. The drive turns 2x briefly as a signal indicating that the command has been understood (approx. Step 3: Then press the UP button (upper button) and also the DOWN button (lower button) immediately and briefly. Once again the drive moves 2x briefly as a signal that the command has been understood. [. . . ] INSTALLATION: The radio-controlled wall switch is fitted to the wall in the same room as the drive it operates. Screws or adhesive tape should be used to fix it in place. TO OPEN: On the side is a marking identifying the point where a thin screwdriver can be applied to prise open the lid. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CHAMBERLAIN RA7524
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CHAMBERLAIN RA7524 will begin.
