User manual CHAMBERLAIN T3EML

[. . . ] Summer/Winter change-over If in standard mode (normal view) the UP and DOWN keys are pressed simultaneously for about 2 sec. , the time will be automatically set back by two hours. By again pressing the UP and DOWN keys simultaneously for about 2 sec. The clock will jump forward again by one hour. [. . . ] 1= A reaction takes place even in the case of brightness (light without direct sun) OFF Sensor not active Factory setting = 4 Press the middle key (mode key) Set the reaction for twilight 9 = Still very bright 1 = Very dark (almost night) Factory setting = 4 Press the middle key (mode key) for at least 2 sec. Weekly clock with optical control system Flush-fitted installation 7 for UP; 7 fo down 1 sun value, 1 twilight value Sun approx. 2 The parts are simply plugged together and can be separated again by carefully withdrawing them (the frame is suitable for the Busch-Jäger alpha nea® range). 2 These safety alert symbols mean Caution - a personal safety or property damage instruction. 3 Failure to comply with the following instructions may result in serious personal injury or property damage. 6 Installation and wiring must be in compliance with your local building and electrical codes. 7 Do not allow children to play with fixed controls. Keep remote controls away from children. You can easily control your roller shutters with the T3EML time switch from Chamberlain. the existing switch is simply replaced by the T3EML unit. When doing so please follow the installation and safety instructions. The built-in time switch offers you additional facilities: You can program fixed daily opening and closing times for your roller shutters or awnings or you can program different opening and closing times for each day of the week. With the optical cable sensor you can even have your roller shutters opened or closed according to the level of brightness. This saves energy and protects your room from the sun's radiation when it is too strong. Operation Following expert installation you can immediately carry out all the necessary settings. Press the middle key once, twice or three times until the symbol AUTO appears on the display. Press the middle key for at least 2 seconds The weekday flashes. The clock symbol, the hour and minute displays and the colon are shown. Following resetting the factory setting = 12:00 (1= Monday). Set weekday with the UP or DOWN keys The chosen weekday flashes (1= Monday, 2= Tuesday, 3= Wednesday, 4= Thursday, 5= Friday, 6= Saturday, 7= Sunday). Acknowledge with the middle key The time (hour display) flashes. the clock symbol , the set weekday , the minute display and the colon are all shown statically. [. . . ] Upon receipt of the product, the first retail purchaser is under obligation to check the product for any visible defects. Conditions: The warranty is strictly limited to the reparation or replacement of the parts of this product which are found to be defective and does not cover the costs or risks of transportation of the defective parts or product. This warranty does not cover non-defect damage caused by unreasonable use (including use not in complete accordance with Chamberlain's instructions for installation, operation and care; failure to provide necessary maintenance and adjustment; or any adaptations of or alterations to the products), labor charges for dismantling or reinstalling of a repaired or replaced unit or replacement batteries. A product under warranty which is determined to be defective in materials and/or workmanship will be repaired or replaced (at Chamberlain's option) at no cost to the owner for the repair and/or replacement parts and/or product. [. . . ]