User manual CHAMBERLAIN TCT2ED

[. . . ] For assembly purposes it is essential to ensure that the unit has no power switched to it. If the drive runs backwards please exchange the connecting lines to the motor at the terminals. With the TCT2ED time switch from Chamberlain you can easily control your roller shutters. the normal switch is simply replaced by the TCT2ED unit. [. . . ] Press the DOWN key until the desired day appears. Daily opening and closing of the roller shutters at a fixed time. The TCT2ED can open your roller shutters in the morning at a fixed time and close them again in the evening at a fixed time. Enter an opening time then confirm the hours and minutes with the UP key. Then enter a closing time and again confirm the hours and minutes with the UP key. ) The roller shutters will now open and close each day at the programmed times. In program mode "A1" ("A" ) the roller shutters open and close each day automatically at the programmed times. In program mode "A7" ("A") the roller shutters open and close automatically each weekday at individually programmed times. Automatic opening and closing of the roller shutters at different times (according to the day of the week) 8. You can also enter different opening and closing times for each day of the week. Enter an opening time then confirm the hours and minutes with the UP key. Then enter a closing time and again confirm the hours and minutes with the UP key. Now select all the other weekdays and program the opening and closing times. Then select Return and then Return again. The roller shutters will now open and close on each day individually according to the programmed times. If instead of entering a time you enter a double hyphen (--) this will deactivate the opening or closing time. You can use this function to automatically close the roller shutters in the evenings so that you can then open them manually in the morning or vice versa. Under the menu option Events you can easily switch between the two automatic programs. = 7 days (different ajustment for each day) Weekly-Prg. Under the menu option Autom you can switch off the automatic functions completely. Here too the programmed times will remain stored in the memory. With the WTMLS1 you can control your roller shutters according to the level of brightness. [. . . ] This warranty does not cover non-defect damage caused by unreasonable use (including use not in complete accordance with Chamberlain's instructions for installation, operation and care; failure to provide necessary maintenance and adjustment; or any adaptations of or alterations to the products), labor charges for dismantling or reinstalling of a repaired or replaced unit or replacement batteries. A product under warranty which is determined to be defective in materials and/or workmanship will be repaired or replaced (at Chamberlain's option) at no cost to the owner for the repair and/or replacement parts and/or product. Defective parts will be repaired or replaced with new or factory rebuilt parts at Chamberlain's option. If, during the warranty period, the product appears as though it may be defective, contact your original place of purchase. [. . . ]