User manual CHANEY INSTRUMENT MODEL 00562 TECH

[. . . ] Pressure Trend Indicator: The 3 different pressure trends will be shown on the unit as arrows. The pressure trend indicator will refresh itself every hour. The arrow shown will indicate: Steady Falling Rising LOW BATTERY INDICATOR Low battery indication is shown on the LCD of the weather station. Replace the batteries and follow the set-up procedure as mentioned in thermometer set-up. [. . . ] Replace the batteries and follow the set-up procedure as mentioned in thermometer set-up. This weather station has an approximate battery life of 12 months. WEATHER STATION SET-UP To read indoor or outdoor temperature, push the switch on the back of the unit. To read outdoor temperature, place the probe wire out a window/door and follow the set-up procedure as mentioned in thermometer set-up. To read indoor temperature, place the unit and probe wire where desired. Temperature Ranges: Main unit: 32° F-122° F/0° C-50° C THERMOMETER SET-UP To select between Celsius and Fahrenheit temperature readings on the weather station, press the C/F switch on the back. Temperature Trend Indicator: The 3 different temperature trend icons will indicate steady, falling, and rising temperatures if the temperature change is more than 1 degree in an hour. Storm Alert: The cloud and rain icon will flash when the unit detects stormy conditions. Day/Night Icon: The sun (indicating daylight) will change to the moon and stars (indicating night time) after 9:10 pm (21:10) and remain until 5:10 am (05:10) when the sun will return. MIN/MAX/MEMORY High and low temperatures can be recorded for any time period by using this feature. Pressing the min/max button will display the maximum temperature value. The settings will be in the following sequence: 12/24 hour; hour; minute; hour offset-allows time to be set ahead (to maintain correct time, keep at 0); year; the day and month. Alarm Setting: Hold the clear button for 3 seconds. Press "+" or "-" to enter the desired time in hours and minutes. Press clear again to confirm the setting when the alarm should sound. A bell will appear in the time panel to show that the alarm is activated. To view the alarm set time, press the clear button while in the normal operating mode. The alarm time will display for 5 seconds and then resume to normal clock mode. When alarm time has been reached, the unit will sound an alarm for 1 minute. During the snooze mode, the alarm will repeat every 10 minutes. To turn the alarm and snooze alarm off, press the "+" button while in normal operating mode. [. . . ] When alarm time has been reached, the unit will sound an alarm for 1 minute. During the snooze mode, the alarm will repeat every 10 minutes. To turn the alarm and snooze alarm off, press the "+" button while in normal operating mode. TROUBLESHOOTING: The weather forecaster feature tracks barometric trend changes, which enables the unit to be 70-80% accurate. [. . . ]