User manual CHANEY INSTRUMENT MODEL 00594 PROFESSIONAL WIRELESS WEATHER STATION

[. . . ] Features: · Main unit with indoor temperature & outdoor temperature LCD display. · Wireless Sensor ­ range is 100' (33m). · Temperature measurement ranges: Indoor main unit: +32º F to +122º F ( 0ºC to +50ºC ) Outdoor wireless sensor: -4º F to +158º F (-20ºC to +70ºC ) · Battery operated. [. . . ] · Temperature measurement ranges: Indoor main unit: +32º F to +122º F ( 0ºC to +50ºC ) Outdoor wireless sensor: -4º F to +158º F (-20ºC to +70ºC ) · Battery operated. (batteries not included 2x "AA", 2 x "AAA") 1 CHECK PACKAGE CONTENTS (1) Main Unit - 2. 75" x 4" x 1. 25"* (1) Wireless Sensor ­ dimensions: 3. 75" x 2. 5" x 1" * (1) Instruction Manual *Dimensions are approximate. NOTE: Carefully remove the units from their packaging. Discard the packaging and save the instructions. 2 READ Please read these instructions carefully before you set up the thermometer. In this way you can become familiar with all of the thermometer's features and get the most benefit from them. 3 SETUP NOTE: The main unit is intended for indoor use only. Choose a dry location away from dust, dirt, mold, smoke and avoid temperature extremes. It is a sensitive electronic device and not designed to withstand high impact blows of any kind. Install 2 "AAA" batteries into the main unit FIRST. Confirm and exit time set mode by pressing the "TIME" button. To switch between 12 & 24 hour time display modes: Press the "+ / 12/24" button Set an Alarm Time: 1) Press and hold the "ALARM" button for 5 seconds, the hour flashes on and off. 2) Adjust the HOUR setting by pressing the "+" or "-" buttons (NOTE the AM & PM). 3) Confirm and move on to the MINUTE setting by pressing the "ALARM" button. 4) Adjust the MINUTE setting by pressing the "+" or "-" buttons. 5) Confirm and exit alarm setting mode by pressing the "ALARM" button again. To Turn the Alarm On or Off: press and release the "ALARM" button (which will immidiately display the alarm time that is currently set) and then press the "+" button. Press the "ALARM" button again to exit. [. . . ] To Turn the Alarm On or Off: press and release the "ALARM" button (which will immidiately display the alarm time that is currently set) and then press the "+" button. Press the "ALARM" button again to exit. Reset the Alarm: To turn the alarm off (while it is ringing) for 24 hours, press the "ALARM" button. [. . . ]